TEAMER: Numerical Model of IProTech PIP WEC Device
iProTech PIP wave energy converter (WEC) is a slack moored, single hull device with no moving parts in the water, joints or bearings. This submission includes data of the simulation, reports, and code for the iProTech PIP (WEC) project. The organization of the data included in the provided archive is detailed below and in the data description of the archive.
The data teamer-iprotech-nrel folder includes and explains matlab and python code developed to hydrodynamically model the PIP WEC device in WEC-Sim. The subfolders cover the following steps:
1) report: explanatory information on device geometry
2) pip_mesher: python code to generate mesh panels from device profile data
3) wec-sim_models: matlab code to run WEC-Sim
The data uploaded is a snapshot as of 11/02/2121 of code residing in a Github repository administered by David Ogden of NREL.
Project was funded as part of the TEAMER RFTS 1 (request for technical support) program.
Citation Formats
TY - DATA
AB - iProTech PIP wave energy converter (WEC) is a slack moored, single hull device with no moving parts in the water, joints or bearings. This submission includes data of the simulation, reports, and code for the iProTech PIP (WEC) project. The organization of the data included in the provided archive is detailed below and in the data description of the archive.
The data teamer-iprotech-nrel folder includes and explains matlab and python code developed to hydrodynamically model the PIP WEC device in WEC-Sim. The subfolders cover the following steps:
1) report: explanatory information on device geometry
2) pip_mesher: python code to generate mesh panels from device profile data
3) wec-sim_models: matlab code to run WEC-Sim
The data uploaded is a snapshot as of 11/02/2121 of code residing in a Github repository administered by David Ogden of NREL.
Project was funded as part of the TEAMER RFTS 1 (request for technical support) program.
AU - Ogden, David
A2 - Van Rij, Jennifer
A3 - Ali, Raza
A4 - Wynn, Nick
A5 - Gray, Nicholas
DB - Marine and Hydrokinetic Data Repository
DP - Open EI | National Renewable Energy Laboratory
DO - 10.15473/1832141
KW - TEAMER
KW - WEC-Sim Numerical Model
KW - PIP Pitching Inertial Pump
KW - IProTech
KW - wave energy capture
KW - WEC
KW - python
KW - code
KW - MATLAB
KW - model
KW - PTO
KW - simulation
KW - WEC-SIM
KW - Active-PTO
KW - geometry
KW - geometry investigation
KW - PTO-SIM
KW - RFTS 1
LA - English
DA - 2021/11/02
PY - 2021
PB - IProTech
T1 - TEAMER: Numerical Model of IProTech PIP WEC Device
UR - https://doi.org/10.15473/1832141
ER -
Ogden, David, et al. TEAMER: Numerical Model of IProTech PIP WEC Device. IProTech, 2 November, 2021, Marine and Hydrokinetic Data Repository. https://doi.org/10.15473/1832141.
Ogden, D., Van Rij, J., Ali, R., Wynn, N., & Gray, N. (2021). TEAMER: Numerical Model of IProTech PIP WEC Device. [Data set]. Marine and Hydrokinetic Data Repository. IProTech. https://doi.org/10.15473/1832141
Ogden, David, Jennifer Van Rij, Raza Ali, Nick Wynn, and Nicholas Gray. TEAMER: Numerical Model of IProTech PIP WEC Device. IProTech, November, 2, 2021. Distributed by Marine and Hydrokinetic Data Repository. https://doi.org/10.15473/1832141
@misc{MHKDR_Dataset_385,
title = {TEAMER: Numerical Model of IProTech PIP WEC Device},
author = {Ogden, David and Van Rij, Jennifer and Ali, Raza and Wynn, Nick and Gray, Nicholas},
abstractNote = {iProTech PIP wave energy converter (WEC) is a slack moored, single hull device with no moving parts in the water, joints or bearings. This submission includes data of the simulation, reports, and code for the iProTech PIP (WEC) project. The organization of the data included in the provided archive is detailed below and in the data description of the archive.
The data teamer-iprotech-nrel folder includes and explains matlab and python code developed to hydrodynamically model the PIP WEC device in WEC-Sim. The subfolders cover the following steps:
1) report: explanatory information on device geometry
2) pip_mesher: python code to generate mesh panels from device profile data
3) wec-sim_models: matlab code to run WEC-Sim
The data uploaded is a snapshot as of 11/02/2121 of code residing in a Github repository administered by David Ogden of NREL.
Project was funded as part of the TEAMER RFTS 1 (request for technical support) program.},
url = {https://mhkdr.openei.org/submissions/385},
year = {2021},
howpublished = {Marine and Hydrokinetic Data Repository, IProTech, https://doi.org/10.15473/1832141},
note = {Accessed: 2025-07-08},
doi = {10.15473/1832141}
}
https://dx.doi.org/10.15473/1832141
Details
Data from Nov 2, 2021
Last updated Feb 8, 2024
Submitted Nov 13, 2021
Organization
IProTech
Contact
Nick Wynn
650.465.7555
Authors
Keywords
TEAMER, WEC-Sim Numerical Model, PIP Pitching Inertial Pump, IProTech, wave energy capture, WEC, python, code, MATLAB, model, PTO, simulation, WEC-SIM, Active-PTO, geometry, geometry investigation, PTO-SIM, RFTS 1DOE Project Details
Project Name Testing Expertise and Access for Marine Energy Research
Project Lead Lauren Ruedy
Project Number EE0008895
