HERO WEC V1.0 2024 - WEC-Sim Detailed Simulation Runs and Summary Data
This dataset includes results from simulations of NREL's hydraulic and electric reverse osmosis wave energy converter (HEREO WEC). Simulation runs include 135 wave cases that were based on the updated WEC-Sim model, which is linked below. The data represented in this repository is based on an updated WEC-Sim model using laboratory data to tune and refine the original WEC-Sim model for the V1.0 HERO WEC.
The 135 wave cases represent waves with the following wave height and wave period ranges:
- Significant Wave Height: 0.25 - 3.75m in 0.25m increments
- Wave Period: 5 - 13 sec in 1 sec increments
Each run was simulated using a Pierson-Moskowitz irregular wave spectrum with a 100 second ramp time, a total simulation time of 3,100 seconds, and a simulation time-step of 0.005s. A reference table has been included to map each multi condition run (MCR) case with each wave condition.
Summary data set includes a spreadsheet and image files with matrices that are associated with data from simulation runs. All matrices cover the same significant wave height and wave periods from the simulation runs, in the same increments. The following matrices are included:
- Power Abs: The average absorbed power from the WEC (calculated from anchor reaction force and heave velocity)
- Power Hyd: The average hydraulic power output at pump (calculated from pump output flow and pressure)
- Power - Hyd ROi: The average hydraulic power measured at the RO system inlet (calculated from RO system pressure and flow (pre-accumulator))
- Flow - Pump out: The average flowrate measured at the pump outlet
- Flow - Perm: The average permeate (clean water) production
- Flow - RO (pre): The average flowrate measured at the inlet of the RO system before the accumulators
- Flow - RO (post): The average flowrate measured after the accumulator bank in the RO system
- Pressure - RO: The average pressure measured at the inlet of the RO system
This data set has been developed by the National Renewable Energy Laboratory, operated by the Alliance for Sustainable Energy, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding provided by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Water Power Technologies Office.
Citation Formats
National Renewable Energy Laboratory. (2024). HERO WEC V1.0 2024 - WEC-Sim Detailed Simulation Runs and Summary Data [data set]. Retrieved from https://dx.doi.org/10.15473/2426346.
Panzarella, Justin, Tran, Toan, and Jenne, Scott. HERO WEC V1.0 2024 - WEC-Sim Detailed Simulation Runs and Summary Data. United States: N.p., 01 Jul, 2024. Web. doi: 10.15473/2426346.
Panzarella, Justin, Tran, Toan, & Jenne, Scott. HERO WEC V1.0 2024 - WEC-Sim Detailed Simulation Runs and Summary Data. United States. https://dx.doi.org/10.15473/2426346
Panzarella, Justin, Tran, Toan, and Jenne, Scott. 2024. "HERO WEC V1.0 2024 - WEC-Sim Detailed Simulation Runs and Summary Data". United States. https://dx.doi.org/10.15473/2426346. https://mhkdr.openei.org/submissions/554.
@div{oedi_554, title = {HERO WEC V1.0 2024 - WEC-Sim Detailed Simulation Runs and Summary Data}, author = {Panzarella, Justin, Tran, Toan, and Jenne, Scott.}, abstractNote = {This dataset includes results from simulations of NREL's hydraulic and electric reverse osmosis wave energy converter (HEREO WEC). Simulation runs include 135 wave cases that were based on the updated WEC-Sim model, which is linked below. The data represented in this repository is based on an updated WEC-Sim model using laboratory data to tune and refine the original WEC-Sim model for the V1.0 HERO WEC.
The 135 wave cases represent waves with the following wave height and wave period ranges:
- Significant Wave Height: 0.25 - 3.75m in 0.25m increments
- Wave Period: 5 - 13 sec in 1 sec increments
Each run was simulated using a Pierson-Moskowitz irregular wave spectrum with a 100 second ramp time, a total simulation time of 3,100 seconds, and a simulation time-step of 0.005s. A reference table has been included to map each multi condition run (MCR) case with each wave condition.
Summary data set includes a spreadsheet and image files with matrices that are associated with data from simulation runs. All matrices cover the same significant wave height and wave periods from the simulation runs, in the same increments. The following matrices are included:
- Power Abs: The average absorbed power from the WEC (calculated from anchor reaction force and heave velocity)
- Power Hyd: The average hydraulic power output at pump (calculated from pump output flow and pressure)
- Power - Hyd ROi: The average hydraulic power measured at the RO system inlet (calculated from RO system pressure and flow (pre-accumulator))
- Flow - Pump out: The average flowrate measured at the pump outlet
- Flow - Perm: The average permeate (clean water) production
- Flow - RO (pre): The average flowrate measured at the inlet of the RO system before the accumulators
- Flow - RO (post): The average flowrate measured after the accumulator bank in the RO system
- Pressure - RO: The average pressure measured at the inlet of the RO system
This data set has been developed by the National Renewable Energy Laboratory, operated by the Alliance for Sustainable Energy, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding provided by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Water Power Technologies Office.}, doi = {10.15473/2426346}, url = {https://mhkdr.openei.org/submissions/554}, journal = {}, number = , volume = , place = {United States}, year = {2024}, month = {07}}
https://dx.doi.org/10.15473/2426346
Details
Data from Jul 1, 2024
Last updated Aug 5, 2024
Submitted Jul 15, 2024
Organization
National Renewable Energy Laboratory
Contact
Scott Jenne
303.384.7248
Authors
Keywords
MHK, Marine, Hydrokinetic, energy, power, HERO WEC, Desalination, WEC-Sim, Power Matrix, Simulation, flow, pressure, multi condition run, wave height, wave period, model, raw data, processed data, summary data, WEC, simulation resultsDOE Project Details
Project Name Wave-Powered Desalination Deployment & Analysis
Project Lead Simon Gore
Project Number FY23 AOP 2.2.6.404