HERO WEC 2024 Hydraulic Configuration Deployment Data
The following submission includes raw and processed data from the in water deployment of NREL's Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC), in the form of parquet files, TDMS files, CSV files, bag files and MATLAB workspaces. This dataset was collected in March 2024 at the Jennette's pier test site in North Carolina.
This submission includes the following:
- Data description document (HERO WEC FY24 Hydraulic Deployment Data Descriptions.doc) - This document includes detailed descriptions of the type of data and how it was processed and/or calculated.
- Processed MATLAB workspace - The processed data is provided in the form of a single MATLAB workspace containing data from the full deployment. This workspace contains data from all sensors down sampled to 10 Hz along with all array Value Added Products (VAPs).
- MATLAB visualization scripts - The MATLAB workspaces can be visualized using the file "HERO_WEC_2024_Hydraulic_Config_Data_Viewer.m/mlx". The user simply needs to download the processed MATLAB workspaces, specify the desired start and end times and run this file. Both the .m and .mlx file format has been provided depending on the user's preference.
- Summary Data - The fully processed data was used to create a summary data set with averages and important calculations performed on 30-minute intervals to align with the intervals of wave resource data reported from nearby CDIP ocean observing buoys located 20km East of Jennette's pier and 40km Northeast of Jennette's pier. The wave resource data provided in this data set is to be used for reference only due the difference in water depth and proximity to shore between the Jennette's pier test site and the locations of the ocean observing buoys. This data is provided in the Summary Data zip folder, which includes this data set in the form of a MATLAB workspace, parquet file, and excel spreadsheet.
- Processed Parquet File - The processed data is provided in the form of a single parquet file containing data from all HERO WEC sensors collected during the full deployment. Data in these files has been down sampled to 10 Hz and all array VAPs are included.
- Interim Filtered Data - Raw data from each sensor group partitioned into 30-minute parquet files. These files are outputs from an intermediate stage of data processing and contain the raw data with no Quality Control (QC) or calculations performed in a format that is easier to use than the raw data.
- Raw Data - Raw, unprocessed data from this deployment can be found in the Raw Data zip folder. This data is provided in the form of TDMS, CSV, and bag files in the original format output by the MODAQ system.
- Python Data Processing Script - This links to an NREL public github repository containing the python script used to go from raw data to fully processed parquet files. Additional documentation on how to use this script is included in the github repository.
This data set has been developed by the National Renewable Energy Laboratory, operated by Alliance for Sustainable Energy, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding provided by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Water Power Technologies Office.
Citation Formats
TY - DATA
AB - The following submission includes raw and processed data from the in water deployment of NREL's Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC), in the form of parquet files, TDMS files, CSV files, bag files and MATLAB workspaces. This dataset was collected in March 2024 at the Jennette's pier test site in North Carolina.
This submission includes the following:
- Data description document (HERO WEC FY24 Hydraulic Deployment Data Descriptions.doc) - This document includes detailed descriptions of the type of data and how it was processed and/or calculated.
- Processed MATLAB workspace - The processed data is provided in the form of a single MATLAB workspace containing data from the full deployment. This workspace contains data from all sensors down sampled to 10 Hz along with all array Value Added Products (VAPs).
- MATLAB visualization scripts - The MATLAB workspaces can be visualized using the file "HERO_WEC_2024_Hydraulic_Config_Data_Viewer.m/mlx". The user simply needs to download the processed MATLAB workspaces, specify the desired start and end times and run this file. Both the .m and .mlx file format has been provided depending on the user's preference.
- Summary Data - The fully processed data was used to create a summary data set with averages and important calculations performed on 30-minute intervals to align with the intervals of wave resource data reported from nearby CDIP ocean observing buoys located 20km East of Jennette's pier and 40km Northeast of Jennette's pier. The wave resource data provided in this data set is to be used for reference only due the difference in water depth and proximity to shore between the Jennette's pier test site and the locations of the ocean observing buoys. This data is provided in the Summary Data zip folder, which includes this data set in the form of a MATLAB workspace, parquet file, and excel spreadsheet.
- Processed Parquet File - The processed data is provided in the form of a single parquet file containing data from all HERO WEC sensors collected during the full deployment. Data in these files has been down sampled to 10 Hz and all array VAPs are included.
- Interim Filtered Data - Raw data from each sensor group partitioned into 30-minute parquet files. These files are outputs from an intermediate stage of data processing and contain the raw data with no Quality Control (QC) or calculations performed in a format that is easier to use than the raw data.
- Raw Data - Raw, unprocessed data from this deployment can be found in the Raw Data zip folder. This data is provided in the form of TDMS, CSV, and bag files in the original format output by the MODAQ system.
- Python Data Processing Script - This links to an NREL public github repository containing the python script used to go from raw data to fully processed parquet files. Additional documentation on how to use this script is included in the github repository.
This data set has been developed by the National Renewable Energy Laboratory, operated by Alliance for Sustainable Energy, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding provided by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Water Power Technologies Office.
AU - Jenne, Scott
A2 - Simms, Andrew
A3 - Panzarella, Justin
A4 - Raye, Rob
A5 - Nichols, Casey
A6 - Bharath, Aidan
A7 - Murphy, Mark
A8 - Swartz, Kyle
A9 - Candon, Charles
DB - Marine and Hydrokinetic Data Repository
DP - Open EI | National Renewable Energy Laboratory
DO - 10.15473/2479748
KW - MHK
KW - Marine
KW - Hydrokinetic
KW - energy
KW - power
KW - HERO WEC
KW - Wave Energy Converter
KW - wave energy
KW - Matlab
KW - Python
KW - TDMS
KW - CSV
KW - parquet
KW - deployment
KW - hydraulic configuration
KW - reverse osmosis
KW - technology
KW - raw data
KW - processed data
KW - North Carolina
KW - NC
KW - hydraulic deployment data
LA - English
DA - 2024/03/14
PY - 2024
PB - National Renewable Energy Laboratory
T1 - HERO WEC 2024 Hydraulic Configuration Deployment Data
UR - https://doi.org/10.15473/2479748
ER -
Jenne, Scott, et al. HERO WEC 2024 Hydraulic Configuration Deployment Data. National Renewable Energy Laboratory, 14 March, 2024, Marine and Hydrokinetic Data Repository. https://doi.org/10.15473/2479748.
Jenne, S., Simms, A., Panzarella, J., Raye, R., Nichols, C., Bharath, A., Murphy, M., Swartz, K., & Candon, C. (2024). HERO WEC 2024 Hydraulic Configuration Deployment Data. [Data set]. Marine and Hydrokinetic Data Repository. National Renewable Energy Laboratory. https://doi.org/10.15473/2479748
Jenne, Scott, Andrew Simms, Justin Panzarella, Rob Raye, Casey Nichols, Aidan Bharath, Mark Murphy, Kyle Swartz, and Charles Candon. HERO WEC 2024 Hydraulic Configuration Deployment Data. National Renewable Energy Laboratory, March, 14, 2024. Distributed by Marine and Hydrokinetic Data Repository. https://doi.org/10.15473/2479748
@misc{MHKDR_Dataset_555,
title = {HERO WEC 2024 Hydraulic Configuration Deployment Data},
author = {Jenne, Scott and Simms, Andrew and Panzarella, Justin and Raye, Rob and Nichols, Casey and Bharath, Aidan and Murphy, Mark and Swartz, Kyle and Candon, Charles},
abstractNote = {The following submission includes raw and processed data from the in water deployment of NREL's Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC), in the form of parquet files, TDMS files, CSV files, bag files and MATLAB workspaces. This dataset was collected in March 2024 at the Jennette's pier test site in North Carolina.
This submission includes the following:
- Data description document (HERO WEC FY24 Hydraulic Deployment Data Descriptions.doc) - This document includes detailed descriptions of the type of data and how it was processed and/or calculated.
- Processed MATLAB workspace - The processed data is provided in the form of a single MATLAB workspace containing data from the full deployment. This workspace contains data from all sensors down sampled to 10 Hz along with all array Value Added Products (VAPs).
- MATLAB visualization scripts - The MATLAB workspaces can be visualized using the file "HERO_WEC_2024_Hydraulic_Config_Data_Viewer.m/mlx". The user simply needs to download the processed MATLAB workspaces, specify the desired start and end times and run this file. Both the .m and .mlx file format has been provided depending on the user's preference.
- Summary Data - The fully processed data was used to create a summary data set with averages and important calculations performed on 30-minute intervals to align with the intervals of wave resource data reported from nearby CDIP ocean observing buoys located 20km East of Jennette's pier and 40km Northeast of Jennette's pier. The wave resource data provided in this data set is to be used for reference only due the difference in water depth and proximity to shore between the Jennette's pier test site and the locations of the ocean observing buoys. This data is provided in the Summary Data zip folder, which includes this data set in the form of a MATLAB workspace, parquet file, and excel spreadsheet.
- Processed Parquet File - The processed data is provided in the form of a single parquet file containing data from all HERO WEC sensors collected during the full deployment. Data in these files has been down sampled to 10 Hz and all array VAPs are included.
- Interim Filtered Data - Raw data from each sensor group partitioned into 30-minute parquet files. These files are outputs from an intermediate stage of data processing and contain the raw data with no Quality Control (QC) or calculations performed in a format that is easier to use than the raw data.
- Raw Data - Raw, unprocessed data from this deployment can be found in the Raw Data zip folder. This data is provided in the form of TDMS, CSV, and bag files in the original format output by the MODAQ system.
- Python Data Processing Script - This links to an NREL public github repository containing the python script used to go from raw data to fully processed parquet files. Additional documentation on how to use this script is included in the github repository.
This data set has been developed by the National Renewable Energy Laboratory, operated by Alliance for Sustainable Energy, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding provided by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Water Power Technologies Office.
},
url = {https://mhkdr.openei.org/submissions/555},
year = {2024},
howpublished = {Marine and Hydrokinetic Data Repository, National Renewable Energy Laboratory, https://doi.org/10.15473/2479748},
note = {Accessed: 2025-04-24},
doi = {10.15473/2479748}
}
https://dx.doi.org/10.15473/2479748
Details
Data from Mar 14, 2024
Last updated Dec 5, 2024
Submitted Oct 24, 2024
Organization
National Renewable Energy Laboratory
Contact
Scott Jenne
Authors
Keywords
MHK, Marine, Hydrokinetic, energy, power, HERO WEC, Wave Energy Converter, wave energy, Matlab, Python, TDMS, CSV, parquet, deployment, hydraulic configuration, reverse osmosis, technology, raw data, processed data, North Carolina, NC, hydraulic deployment dataDOE Project Details
Project Name Wave-Powered Desalination Deployment & Analysis
Project Lead Simon Gore
Project Number FY23 AOP 2.2.6.404