TEAMER: Numerical Analysis of a Novel Nearshore at-surface WEC
This dataset comprises of raw numerical simulation data conducted on a novel nearshore at-surface wave energy converter (WEC). The testing aimed and was intended to provide a calibration then optimization regime through numerical analysis.
This project is part of the TEAMER RFTS 10 (request for technical support) program.
This data builds upon the research and publication carried out in RFTS 4 regarding a unique half submerged, biconcave buoy that extracts surge and heave motions, but with further modifications that allow for a low number of moving parts, a passive severe force protection system and a more manufacturable design. To produce this raw data, Laminar Scientific Inc. worked with AMOG Consulting to carry out numerical analysis to analyze the performance of the concave buoy, novel nearshore at-surface WEC, analyze sensitivities to varied damping coefficients and stiffness, along with testing the different configurations of the severe force protection system.
This subset of data provides the raw data and scripts used through multiple phases of the project as specified through the scope of work stated in the report (TEAMER-Laminar_AMOG Test Plan Report).
The folders provided are as follows:
- Calibrated_Model_Phase
- Sensitivity_Model_Phase
- Final_Model_Normal
- Final_Model_Capitulated
- Final_Model_Extended_Scope
In the folders, there consists of raw data in .csv files with names specified as nm2023.j517_###_Model.001.#.##.Time_Histories_FM#.csv (see included README File for more information).These files are named according to the model phase, WEC orientation, wave height and wave period specific to its respective model phase wave matrix and comparing file.
In each csv., data that was deemed necessary for the conduct of the project are labeled with units in SI. Accompanying each iteration folder, there provides a Julia Script that was used to create the plots used in the final report.
Citation Formats
TY - DATA
AB - This dataset comprises of raw numerical simulation data conducted on a novel nearshore at-surface wave energy converter (WEC). The testing aimed and was intended to provide a calibration then optimization regime through numerical analysis.
This project is part of the TEAMER RFTS 10 (request for technical support) program.
This data builds upon the research and publication carried out in RFTS 4 regarding a unique half submerged, biconcave buoy that extracts surge and heave motions, but with further modifications that allow for a low number of moving parts, a passive severe force protection system and a more manufacturable design. To produce this raw data, Laminar Scientific Inc. worked with AMOG Consulting to carry out numerical analysis to analyze the performance of the concave buoy, novel nearshore at-surface WEC, analyze sensitivities to varied damping coefficients and stiffness, along with testing the different configurations of the severe force protection system.
This subset of data provides the raw data and scripts used through multiple phases of the project as specified through the scope of work stated in the report (TEAMER-Laminar_AMOG Test Plan Report).
The folders provided are as follows:
- Calibrated_Model_Phase
- Sensitivity_Model_Phase
- Final_Model_Normal
- Final_Model_Capitulated
- Final_Model_Extended_Scope
In the folders, there consists of raw data in .csv files with names specified as nm2023.j517_###_Model.001.#.##.Time_Histories_FM#.csv (see included README File for more information).These files are named according to the model phase, WEC orientation, wave height and wave period specific to its respective model phase wave matrix and comparing file.
In each csv., data that was deemed necessary for the conduct of the project are labeled with units in SI. Accompanying each iteration folder, there provides a Julia Script that was used to create the plots used in the final report.
AU - Villarreal, Alejandro
A2 - Thurumella, Hemant
A3 - Dillon-Gibbons, Craig
A4 - Kilner, Andrew
DB - Marine and Hydrokinetic Data Repository
DP - Open EI | National Renewable Energy Laboratory
DO -
KW - marine
KW - TEAMER
KW - WEC
KW - Wave Energy
KW - Numerical Analysis
KW - RFTS10
KW - raw data
KW - simulation data
KW - wave energy converter
KW - performance
KW - concave buoy
KW - CSV
KW - scripts
KW - Julia Script
LA - English
DA - 2024/01/15
PY - 2024
PB - Laminar Scientific Inc.
T1 - TEAMER: Numerical Analysis of a Novel Nearshore at-surface WEC
UR - https://mhkdr.openei.org/submissions/592
ER -
Villarreal, Alejandro, et al. TEAMER: Numerical Analysis of a Novel Nearshore at-surface WEC. Laminar Scientific Inc., 15 January, 2024, Marine and Hydrokinetic Data Repository. https://mhkdr.openei.org/submissions/592.
Villarreal, A., Thurumella, H., Dillon-Gibbons, C., & Kilner, A. (2024). TEAMER: Numerical Analysis of a Novel Nearshore at-surface WEC. [Data set]. Marine and Hydrokinetic Data Repository. Laminar Scientific Inc.. https://mhkdr.openei.org/submissions/592
Villarreal, Alejandro, Hemant Thurumella, Craig Dillon-Gibbons, and Andrew Kilner. TEAMER: Numerical Analysis of a Novel Nearshore at-surface WEC. Laminar Scientific Inc., January, 15, 2024. Distributed by Marine and Hydrokinetic Data Repository. https://mhkdr.openei.org/submissions/592
@misc{MHKDR_Dataset_592,
title = {TEAMER: Numerical Analysis of a Novel Nearshore at-surface WEC},
author = {Villarreal, Alejandro and Thurumella, Hemant and Dillon-Gibbons, Craig and Kilner, Andrew},
abstractNote = {This dataset comprises of raw numerical simulation data conducted on a novel nearshore at-surface wave energy converter (WEC). The testing aimed and was intended to provide a calibration then optimization regime through numerical analysis.
This project is part of the TEAMER RFTS 10 (request for technical support) program.
This data builds upon the research and publication carried out in RFTS 4 regarding a unique half submerged, biconcave buoy that extracts surge and heave motions, but with further modifications that allow for a low number of moving parts, a passive severe force protection system and a more manufacturable design. To produce this raw data, Laminar Scientific Inc. worked with AMOG Consulting to carry out numerical analysis to analyze the performance of the concave buoy, novel nearshore at-surface WEC, analyze sensitivities to varied damping coefficients and stiffness, along with testing the different configurations of the severe force protection system.
This subset of data provides the raw data and scripts used through multiple phases of the project as specified through the scope of work stated in the report (TEAMER-Laminar_AMOG Test Plan Report).
The folders provided are as follows:
- Calibrated_Model_Phase
- Sensitivity_Model_Phase
- Final_Model_Normal
- Final_Model_Capitulated
- Final_Model_Extended_Scope
In the folders, there consists of raw data in .csv files with names specified as nm2023.j517_###_Model.001.#.##.Time_Histories_FM#.csv (see included README File for more information).These files are named according to the model phase, WEC orientation, wave height and wave period specific to its respective model phase wave matrix and comparing file.
In each csv., data that was deemed necessary for the conduct of the project are labeled with units in SI. Accompanying each iteration folder, there provides a Julia Script that was used to create the plots used in the final report.},
url = {https://mhkdr.openei.org/submissions/592},
year = {2024},
howpublished = {Marine and Hydrokinetic Data Repository, Laminar Scientific Inc., https://mhkdr.openei.org/submissions/592},
note = {Accessed: 2025-05-06}
}
Details
Data from Jan 15, 2024
Last updated Mar 5, 2025
Submitted Jan 9, 2025
Organization
Laminar Scientific Inc.
Contact
Narayan Iyer
312.909.2629
Authors
Keywords
marine, TEAMER, WEC, Wave Energy, Numerical Analysis, RFTS10, raw data, simulation data, wave energy converter, performance, concave buoy, CSV, scripts, Julia ScriptDOE Project Details
Project Name Testing Expertise and Access for Marine Energy Research
Project Lead Lauren Ruedy
Project Number EE0008895