Search MHK Data

LCOE Baseline for OE Buoy WEC Device

Capex numbers are in $/kW, Opex numbers in $/kW-yr. Cost Estimates provided herein are based on concept design and basic engineering data and have high levels of uncertainties embedded. This reference economic scenario was done for a very large device version of the Ocean Energy ...

Previsic, M. et al Re Vision Consulting

Jul 26, 2017
2 Resources
0 Stars
Publicly accessible

TEAMER: Maximal Asymmetric Drag Wave Energy Converter

Boundary element method (BEM) and WEC-Sim analysis of UMass Dartmouth's maximal asymmetric drag wave energy converter (MADWEC), including its tethered ballast system and PTO (power take-off). This project is part of the TEAMER RFTS 6 (request for technical support) program.

MacDonald, D. et al University of Massachusetts Dartmouth

Aug 18, 2023
2 Resources
0 Stars
Curated

LandRAY PTO Testing Utilizing the NREL NWTC 5MW Dynamometer

The overarching project objective is to demonstrate the feasibility of using an innovative PowerTake-Off (PTO) Module in Columbia Power's utility-scale wave energy converter (WEC). The PTO Module uniquely combines a large-diameter, direct-drive, rotary permanent magnet generator; ...

Lenee-Bluhm, P. and Rhinefrank, K. Columbia Power Technologies, Inc.

Jun 13, 2016
3 Resources
0 Stars
Publicly accessible

Motion Tracking Above and Below Water Dataset

This data set includes one trial of above and under water motion tracking measurements from a Qualysis motion tracking system. The Qualisys native .qtm file can be opened by the Qualisys Track Manager software. Data from this file has been exported to a tab separated value (.tsv...

Bosma, B. and Lomonaco, P. Pacific Marine Energy Center (PMEC)

Apr 23, 2021
3 Resources
0 Stars
Publicly accessible

TEAMER: Water Tunnel Data from Testing the Pterofin Skimmer Concept

Pterofin's Skimmer concept relies on a flapping and pitching hydrofoil to extract hydrokinetic energy from water flows. The concept aims to utilize unsteady fluid dynamics phenomena (added mass, shed vorticity, and unsteady boundary layer development) to achieve higher lift coeffi...

Jaffa, N. et al Pennsylvania State University, Applied Research Laboratory

Jul 13, 2023
7 Resources
1 Stars
Publicly accessible

SeaRAY WEC Preliminary Design and Test Planning

The SeaRAY is a deployable power system for maritime sensors, monitoring equipment, communications, unmanned underwater vehicles, and other similar payloads. This project is to design, deliver, and test a prototype low-power WEC that lowers the total cost of ownership and provides...

Hammagren, E. et al Columbia Power Technologies, Inc.

May 18, 2020
4 Resources
0 Stars
Awaiting release

Performance estimation of resonance-enhanced dual-buoy wave energy converter using coupled time-domain simulation

This paper presents the modeling methodology and performance evaluation of the resonance-enhanced dual-buoy WEC (Wave Energy Converter) by HEM (hydrodynamic & electro-magnetic) fully-coupled-dynamics time-domain-simulation program. The numerical results are systematically compared...

Kang, H. et al Texas A&M University

Aug 31, 2020
3 Resources
0 Stars
Publicly accessible

LandRAY PTO Test Plans with NREL NWTC 5 MW Dynamometer

Prudell, J. et al Columbia Power Technologies, Inc.

Feb 29, 2016
5 Resources
0 Stars
Publicly accessible

TEAMER: Wave Energy Converter SIMulator (WEC-SIM) Support for an Adaptive Wave Energy Converter by Ocean Motion Technologies

Scripts from project git repo + tutorial slide deck generated for the TEAMER RFTS 1 (request for technical support) collaborative project between Ocean Motion Technologies, Inc. and Sandia National Laboratories + National Renewable Energy Laboratory. The project simulates an adapt...

Keester, A. et al Ocean Motion Technologies, Inc.

Jan 29, 2021
3 Resources
0 Stars
Awaiting release

CalWave WEC Open Water Demonstration Final Test Report

The objective of this project is to advance the Technology Readiness Level of the x1 Wave Energy Converter (WEC) developed by CalWave Power Technologies Inc. through advanced numerical simulations, dynamic hardware tests, and ultimately a scaled open water demonstration deployment...

Boerner, T. et al CalWave Power Technologies Inc.

Nov 30, 2022
2 Resources
1 Stars
Curated

CalWave Holistic PTO Design Product Requirement Document

CalWave Power Technologies is currently in the process of developing the conceptual architecture for a fully upscaled Wave Energy Converter. Current and past efforts have been for smaller scaled systems, with commensurately lower forces and length scales. This document contains a ...

Kojimoto, N. et al CalWave Power Technologies Inc.

Dec 06, 2021
1 Resources
0 Stars
Awaiting release

Most Likely Extreme Response Analysis of an Ellipsoid Float Wave Energy Converter

Input data and heave results (unsteady RANS-VOF overset simulations performed in Star-CCM+) for a float with an ellipsoid geometry. Five extreme sea states were considered, as detailed in the conference paper "Application of the Most Likely Extreme Response Method for Wave Energy ...

Quon, E. National Renewable Energy Laboratory

Jun 17, 2016
7 Resources
0 Stars
Publicly accessible

CalWave WEC Open Water Demonstration Public Final Test Report

Boerner, T. et al CalWave Power Technologies Inc.

Nov 30, 2022
2 Resources
0 Stars
Curated

M3 Wave DMP/APEX WEC Survival Test Report

This survival test report for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX," summarizes the key tank test data, numerical model results, input test conditions (both numerical and tank testing), and crosses these items with three designs of t...

Morrow, M. and Delos-Reyes, M. M3 Wave

Aug 31, 2017
1 Resources
0 Stars
Publicly accessible

CalWave xWave Device, Non-Commercially Sensitive Project Report

CalWave has developed a submerged pressure differential type Wave Energy Converter (WEC) architecture called xWave. The single body device oscillates submerged, is positively buoyant, and taut moored to the sea floor and integrates novel features such as absorber submergence depth...

Lehmann, M. and Davidson, R. CalWave Power Technologies Inc.

Feb 29, 2024
1 Resources
0 Stars
Publicly accessible

TEAMER: xWave Real Time IMU Optimization for Advanced Controls

CalWave is developing a wave energy converter (WEC) called xWave that operates fully submerged and is classified as a type of submerged pressure differential WEC. As ocean waves pass over the submerged wave buoy, a pressure differential is created, exciting the absorber in multipl...

Spinneken, J. and Boerner, T. CalWave Power Technologies Inc.

Apr 18, 2023
2 Resources
0 Stars
Curated

CalWave Open Water Demonstration LCOE Content Model

Data for the CalWave Open Water Demonstration, a submerged pressure differential Wave Energy Converter (WEC) Device. Device is moored to the seabed, and the motion of the waves causes the sea level to rise and fall above the device, inducing a pressure differential in the device. ...

Petcovic, D. et al CalWave Power Technologies Inc.

Dec 06, 2022
1 Resources
0 Stars
Curated

Focusing Wave Energy for Wave Energy Converter Applications

Wave tank tests at Stevens Institute of Technology quantified the ability of near-surface platforms to concentrate wave energy over the platform. Due to the instantaneous change in water depth, mass, energy, and power are conserved in this process. The energy and power concentrat...

Raftery, M. Martin and Ottaway

Aug 10, 2010
7 Resources
0 Stars
Publicly accessible

TEAMER: Numerical Modeling and Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC)

This project focused on developing an automated workflow to evaluate and optimize the iProTech Pitching Inertial Pump (PIP) wave energy converter (WEC) using open-source Python packages and the MATLAB/Simulink tool, WEC-Sim. The process involved parameterizing key design variables...

Wynn, N. et al National Renewable Energy Laboratory

Apr 11, 2024
1 Resources
0 Stars
Curated

TEAMER: Initial Testing of Wave Energy-Powered UV-C LED Anti-Biofouling System, Post-Access Report, 3newable LLC

Biofouling severely limits the quality of data coming from buoy-mounted sensors. 3newable is co-developing a unique solution to the biofouling problem together with the Ocean Observatories Initiative (OOI) at WHOI to design and build a buoy-mounted WEC as an integrated power sourc...

Minsky, M. et al 3newable LLC

Sep 20, 2022
2 Resources
0 Stars
Publicly accessible

TEAMER: CalWave xWave New Technology Qualification and Path to Certification Final Report

CalWave is developing a wave energy converter (WEC) called xWave, which operates fully submerged and is classified as a submerged pressure differential type. As ocean waves pass over the submerged wave buoy, a pressure differential is created, exciting the absorber in multiple deg...

Petcovic, D. and Zhang, S. CalWave Power Technologies Inc.

Oct 31, 2022
2 Resources
0 Stars
Curated

TEAMER: MADWEC Techno-Economic Analysis

The objective of this project was for the facility to conduct a techno-economic assessment (TEA) of the Maximal Asymmetric Drag Wave Energy Converter (MADWEC), developed by the University of Massachusetts Dartmouth (UMass Dartmouth). MADWEC is used for powering remote monitoring a...

Ortega, T. and Baca, E. National Renewable Energy Laboratory

Mar 08, 2024
2 Resources
0 Stars
Curated

StingRAY Structural Optimization Final Technical Report

The overall project objective is to materially decrease the leveled cost of energy (LCOE) of the Columbia Power (CPower) StingRAY utility-scale wave energy converter (WEC). This will be achieved by reducing structural material and manufacturing costs and increasing energy output. ...

Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Aug 05, 2020
2 Resources
0 Stars
Publicly accessible

H3 StingRAY Final Design and Technical Report

The goal of this Project was to develop a standards-compliant, fabrication-ready design of Columbia Power Technologies' (C-Power) next-generation wave energy converter (WEC), the StingRAY H3. The H3 is a design iteration of C-Power's StingRAY WEC and is intended for electrical pow...

Prudell, J. and Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Sep 15, 2023
2 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC Device Configuration Drawings

Configurations as tested and modeled in final phase of project for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX."