Search MHK Data

Bench Testing Data and Report for an Early Prototype Pitch Resonator WEC

This dataset encompasses data and documentation from bench tests conducted on an early prototype of a "pitch resonator" wave energy converter (WEC). The testing aimed to validate numerical models and reduce risks associated with the pitch resonator concept, which is designed to co...

Coe, R. et al Sandia National Laboratories

Aug 09, 2024
4 Resources
0 Stars
Publicly accessible

TEAMER: Maximal Asymmetric Drag Wave Energy Converter

Boundary element method (BEM) and WEC-Sim analysis of UMass Dartmouth's maximal asymmetric drag wave energy converter (MADWEC), including its tethered ballast system and PTO (power take-off). This project is part of the TEAMER RFTS 6 (request for technical support) program.

MacDonald, D. et al University of Massachusetts Dartmouth

Aug 18, 2023
3 Resources
0 Stars
Curated

Tank Testing of Waveberg Wave Energy Converter

Waveberg tank test data guide: The files are in alphabetical order after the first sub file; this file contains earlier versions of the master analysis file. As I was working, I would take a graph and drop it into the draft final report, since I did not understand the data tracea...

Wegener, P. DBA Waveberg Development

Apr 20, 2025
15 Resources
0 Stars
In curation

Experimental Testing of a Floating Oscillating Surge Wave Energy Converter at Hinsdale Wave Research Laboratory

In order to generate a public data set that can be used to validate Wave Energy Converter (WEC) numerical codes, such as WEC-Sim, Sandia National Laboratories led an experimental testing campaign of a 1:33 scale Floating Oscillating Surge Wave Energy Converter (FOSWEC) in the Dire...

Ruehl, K. et al Sandia National Laboratories

Jun 15, 2016
3 Resources
0 Stars
Publicly accessible

TEAMER: Sandia and CalWave Torque Spring Assessment

Power-take-off (PTO) systems for wave energy converters (WEC) require restoring forces for efficient hydrodynamic as well as mechanical to electric power transfer. Implementation of an effective spring mechanism that can provide a restoring torque on e.g. a rotational, winch type ...

Boerner, T. et al CalWave Power Technologies Inc.

Apr 01, 2022
3 Resources
0 Stars
Awaiting release

TEAMER: Experimental performance characterization of a shrouded axial-flow turbine

Sitkana has developed a shrouded hydrokinetic turbine with a modular, low-cost design that can be scaled to meet the needs of remote communities. With technical support from the University of Washington, Sitkana sought to experimentally characterize the mechanical power and struct...

McMullan, L. et al University of Washington

Oct 20, 2023
2 Resources
0 Stars
Publicly accessible

Linear and Nonlinear Spectra for Time Series Measured in the North Sea

This submission includes both linear and nonlinear wave spectra for time series taken off the Ekofisk Oil Platform in the North Sea for the years 2003-2020. The raw data was sourced from the Norwegian Meteorological Institute (https://www.met.no/en) and processed in Matlab. This...

Sutherland, A. Pacific Marine Energy Center (PMEC)

Jan 28, 2025
3 Resources
0 Stars
Curated

Floating Wave Amplifier regular-wave basin experiment: wave-field, structural-motion, nonlinear phase-coupling, and WAMIT validation data

This dataset supports an experimental investigation of a V-shaped Floating Wave Amplifier (FWA) composed of two submerged flexible circular fabric beams. The experiments were conducted in the O.H. Hinsdale Large Wave Basin at Oregon State University. Synchronized resistive wave-ga...

Sutherland, A. Oregon State University

Jul 01, 2021
7 Resources
0 Stars
Curated

Evaluation of 1/100th Scale Mooring Systems for Wave Energy Converters

This study evaluates the feasibility, accuracy, and limitations of using 1/100th scale physical mooring systems to represent full-scale mooring behavior for wave energy converters (WECs) during small-scale tank testing. The work focuses on an RM3-style point absorber deployed in c...

Candon, C. et al National Laboratory of the Rockies

Oct 18, 2024
3 Resources
0 Stars
Curated

TEAMER: Public Initial Optimization of a Vessel-mounted Removable Current Energy Converter

This project focuses on developing a numerical tool to estimate the Levelized Cost of Energy (LCOE) for vessel-mounted hydrokinetic turbines. By leveraging open-source software and public-domain data, the tool evaluates energy capture and costs for deploying turbines on vessels in...

Forbush, D. et al Sandia National Laboratories

Jul 31, 2024
4 Resources
0 Stars
Curated

TEAMER: Proprietary Initial Optimization of a Vessel-mounted Removable Current Energy Converter

Forbush, D. et al Sandia National Laboratories

Jul 31, 2024
4 Resources
0 Stars
Curated

TEAMER: CFD Simulation Datasets of Dehlsen Associates' Centipod Wave Energy Converter

This directory contains data-sets pertaining to the Computational Fluid Dynamics (CFD) modeling of Dehlsen Associates, LLC "Centipod 1P6" (C1P6) two-part point absorber wave energy converter (WEC) by Sandia National Labratory. This project is part of the TEAMER RFTS 11 (request fo...

Bayat, E. and Chartrand, C. Sandia National Laboratories

Apr 21, 2026
1 Resources
0 Stars
Curated

Gradient-Based Optimization Framework for Mass Distribution of Floating Wave Energy Converter Hulls

This MATLAB suite optimizes the internal mass distribution and inertial properties of floating wave energy converter (WEC) hulls. The gradient-based framework employs Sequential Quadratic Programming (SQP) to tune uncoupled natural frequencies in heave and/or pitch towards resonan...

Kotzamanis, V. and Kalliontzis, D. University of Houston

May 01, 2026
7 Resources
0 Stars
Curated

Small Scale WEC Performance Modeling Data

Small Scale WEC Performance Modeling Data is performance data from downscaled models of common WEC devices and their calculated performance outputs. This data is used by the Small WEC interactive modeling tool hosted by PRIMRE. The devices include a point absorber, a two-body poin...

King, T. et al National Renewable Energy Laboratory

Nov 08, 2021
68 Resources
0 Stars
Publicly accessible

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Sim Model

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
6 Resources
0 Stars
Publicly accessible

TEAMER: Mass of Water Turbine Current Energy Converter CFD Results

The CFD (computational fluid dynamics) results for the Mass of Water Turbine (MOWT) current energy converter from MWNW Consulting (formerly Ecosse IP). Each case is self-contained in its own tar.gz archive file. The archive contains the scripts required to perform a full simulati...

Chartrand, C. and Moir, S. Sandia National Laboratories

May 27, 2022
76 Resources
0 Stars
Curated

Reference Model 1 Full Scale Geometry (RM1: Tidal Current Turbine)

Contains the Reference Model 1 (RM1) full scale geometry files of the Tidal Current Turbine, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, X_T, IGS, and STEP files, and require a CAD program to view. This data was...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
7 Resources
0 Stars
Publicly accessible

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Test Logs and Results

Hagmuller, A. et al AquaHarmonics, Inc.

Dec 16, 2021
10 Resources
0 Stars
Curated

Simulink Model of a New Energy EVG-005 5kW Hydropower Turbine

Simulink model for a New Energy 5kW hydropower turbine. ADCP data ("ds_streamwise_7_13.nc") and DC voltage, DC current, and rotor rotation observed from the New Energy EVG-005 Current Energy Converter (CEC) ("electrical_7_13_10ohms.nc") were collected at the Tanana River Test Sit...

Browning, E. et al University of Alaska Fairbanks

Jul 13, 2023
2 Resources
0 Stars
Publicly accessible

HERO WEC V1 Upgrades SolidWorks Models (WEC, RO System, and Submersible Pump Housing)

The attached zip files include SolidWorks pack-and-go assemblies of NREL's HERO WEC (hydraulic and electric reverse osmosis wave energy converter), the reverse osmosis (RO) assembly, and the submersible pump assembly that is used to provide flow to the RO assembly in the electric ...

Jenne, S. and Panzarella, J. National Renewable Energy Laboratory

Jan 08, 2024
4 Resources
0 Stars
Publicly accessible

Reference Model 6 Full Scale Geometry (RM6: Oscillating Water Column)

Contains the Reference Model 6 (RM6) full scale geometry files of the Oscillating Water Column, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. This data was g...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
4 Resources
0 Stars
Publicly accessible

Laboratory Upgrade Point Absorber WEC-Sim Model with MoorDyn Moorings

This dataset includes a WEC-Sim and MoorDyn model of the Laboratory Upgrade Point Absorber (LUPA). LUPA is an open-source wave energy converter designed and tested by Oregon State University. The files provided here constitute a stable LUPA configuration with three mooring lines. ...

Mcconnell, A. Oregon State University

Oct 08, 2024
2 Resources
0 Stars
Curated

Design of high-deflection foils MHK applications CFD models Helical turbines

The Ocean Renewable Power Company's (ORPC's) goal is to design, develop, and test hydrofoils with large deflections. The effects of the deflections on cross-flow turbine performance would be evaluated in order to inform design considerations for full-scale water turbines and other...

Barrington, M. and McEntee, J. Ocean Renewable Power Company

Nov 01, 2021
2 Resources
0 Stars
Publicly accessible

Reference Model 2 Scaled Geometry (RM2: River Current Turbine)

Contains the Reference Model 2 (RM2) scaled scale geometry files of the River Current Turbine, developed by the Reference Model Project (RMP). These scaled geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. The scaled RM2 devic...

Neary, V. and Hill, C. Sandia National Laboratories

Sep 30, 2014
5 Resources
0 Stars
Publicly accessible

HERO WEC V1.0 WEC-Sim Model (July 2024)

**This submission supersedes submission MHKDR-483** This submission file contains the files that are needed to simulate NREL's HERO WEC (hydraulic and electric reverse osmosis wave energy converter). This requires the user to have already installed WEC-Sim. In addition to the sta...

Panzarella, J. et al National Renewable Energy Laboratory

Jul 01, 2024
2 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 Next >>