Search MHK Data

Experimental Wave Desalination Data with Variable Feed and Pressure Input

This is the raw data collected from various experiments seeking to characterize reverse osmosis membrane performance under dynamic feed conditions (i.e., varying feed pressure and flow rate) such as those that might be experienced in a wave desalination system. This data was colle...

Sitterley, K. et al National Renewable Energy Laboratory

Jul 29, 2025
6 Resources
0 Stars
In curation

Motion Tracking Above and Below Water Dataset

This data set includes one trial of above and under water motion tracking measurements from a Qualysis motion tracking system. The Qualisys native .qtm file can be opened by the Qualisys Track Manager software. Data from this file has been exported to a tab separated value (.tsv...

Bosma, B. and Lomonaco, P. Pacific Marine Energy Center (PMEC)

Apr 23, 2021
3 Resources
0 Stars
Publicly accessible

PacWave South SeaRAY k2 Risk Registers

The SeaRAY is a deployable power system for maritime sensors, monitoring equipment, communications, unmanned underwater vehicles, and other similar payloads. This project is to design, deliver, and test a prototype low-power WEC that lowers the total cost of ownership and provides...

Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Sep 29, 2023
12 Resources
0 Stars
Curated

CalWave Open Water Demo FMEA Update Budget Period 2

The Failure Modes and Effects Analysis (FMEA) is a qualitative reliability technique for systematically analyzing each possible failure mode within a hardware system, and identifying the resulting effect on that system, the mission, and the personnel. This submission includes an u...

Boerner, T. et al CalWave Power Technologies Inc.

Oct 09, 2020
1 Resources
0 Stars
Awaiting release

HERO WEC V1.0 2024 WEC-Sim Detailed Simulation Runs and Summary Data

This dataset includes results from simulations of NREL's hydraulic and electric reverse osmosis wave energy converter (HEREO WEC). Simulation runs include 135 wave cases that were based on the updated WEC-Sim model, which is linked below. The data represented in this repository i...

Panzarella, J. et al National Renewable Energy Laboratory

Jul 01, 2024
6 Resources
0 Stars
Publicly accessible

TEAMER: Ultra-Low-Cost Torpedo Anchors for Marine Renewable Energy

The submission includes all raw and processed data from Sperra's TEAMER RFTS 9 Drop Testing of Ultra-Low-Cost Torpedo Anchors for Marine Renewable Energy project. This dataset provides comprehensive technical information from the drop test campaign conducted at Sandia National Lab...

Bell, M. et al RCAM Technologies, Inc. DBA Sperra

Sep 20, 2024
8 Resources
1 Stars
Curated

UMass 2-Body WEC Techno-Economic Assessment

The University of Massachusetts (UMass) is developing a 2-body wave energy converter (WEC) device that is converting mechanical power into electricity using a mechanical motion rectifier that allows the system to couple to a flywheel. UMass has completed numerical modeling, wave t...

Previsic, M. Re Vision Consulting

Nov 19, 2024
2 Resources
0 Stars
Publicly accessible

HERO WEC V1 Upgrades SolidWorks Models (WEC, RO System, and Submersible Pump Housing)

The attached zip files include SolidWorks pack-and-go assemblies of NREL's HERO WEC (hydraulic and electric reverse osmosis wave energy converter), the reverse osmosis (RO) assembly, and the submersible pump assembly that is used to provide flow to the RO assembly in the electric ...

Jenne, S. and Panzarella, J. National Renewable Energy Laboratory

Jan 08, 2024
4 Resources
0 Stars
Publicly accessible

CalWave Reports and Plans for xWave Device Demonstration at PacWave South Site

CalWave has developed a submerged pressure differential type Wave Energy Converter (WEC) architecture called xWave. The single body device oscillates submerged, is positively buoyant, and taut moored to the sea floor and integrates novel features such as absorber submergence depth...

Boerner, T. et al CalWave Power Technologies Inc.

Feb 29, 2024
6 Resources
0 Stars
Awaiting release

TEAMER: CalWave UMaine 2021 Tank Testing

This is the data submission to the teamer report for RFTS 1 (request for technical support) during which tank testing at UMaine W2 tank occurred. This submission includes the relevant information and recorded data of CalWave's UMaine wave tank testing conducted under TEAMER Reques...

Boerner, T. CalWave Power Technologies Inc.

Apr 01, 2021
1 Resources
0 Stars
Awaiting release

Radar Recording from PMEC-SETS TRIAXYS Experiment, Offshore of Newport, OR

This is radar data recorded by Oregon State University's Nearshore Remote Sensing Group near the TRIAXYS buoy at PMEC-SETS off the coast of Newport, OR on December 15, 2015.

Pittman, R. Northwest National Marine Renewable Energy Center

Dec 15, 2015
1 Resources
0 Stars
Curated

Azura Advanced Controls 1/15th Scale Wave Tank Testing

Experimental data from the wave tank test of the Advanced control systems developed by Northwest Energy Innovations (NWEI) for the Azura at the University of Maine in Orono (UMO). Summary data is included utilizing the WEC Lab Testing Content Model v2.1. All raw and processed expe...

Ling, B. Northwest Energy Innovations

Feb 02, 2018
10 Resources
0 Stars
Publicly accessible

TEAMER: Heterogeneous Wave Energy Converter Test Data

This dataset was generated during the Heterogeneous Wave Energy Converter (HetWECs) experimental campaign conducted at the O.H. Hinsdale Direction Wave Basin at Oregon State University. Experiments include system identification, hydrodynamics, and power take-off (PTO) tests. The ...

Vitale, O. et al Cornell University

Jun 27, 2025
8 Resources
0 Stars
Curated

StingRAY Updated WEC Risk Registers

Updated Risk Registers for major subsystems of the StingRAY WEC completed according to the methodology described in compliance with the DOE Risk Management Framework developed by NREL.

Rhinefrank, K. and Ondusko, M. Columbia Power Technologies, Inc.

Jun 27, 2018
17 Resources
0 Stars
Publicly accessible

RM3 Wave Tank Validation Model

An approximately 1/75th scale point absorber wave energy absorber was built to validate the testing systems of a 16k gallon single paddle wave tank. The model was build based on the RM3 design and incorporated a linear position sensor, a force transducer, and wetness detection sen...

Candon, C. and Fao, R. National Renewable Energy Laboratory

Jul 31, 2023
3 Resources
0 Stars
Publicly accessible

Risk Management Plan and Risk Register for Design Low-Power Wave Energy Converter for Non-Grid Applications

Risk Registers for major subsystems completed according to the methodology described in the Risk Management Plan [DE-EE0008627 D1.2 Risk Management Plan PD v1.1 07-19-2019.pdf], also included here.

Amon, E. Columbia Power Technologies, Inc.

Jul 19, 2019
17 Resources
0 Stars
Publicly accessible

TEAMER: Laboratory Upgrade Point Absorber v2 CAD Model and Bill of Materials

The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD) files are provided here in two forms: the original SOLIDWORKS (2024) model as "LUPA SOLIDWORKS.zip" and as a STEP fi...

Robertson, B. et al Oregon State University

Apr 22, 2025
9 Resources
0 Stars
Curated

Wave Energy Prize 1/50th Testing WECCA Attenuator

This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the WECCA team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized re...

Scharmen, W. Ricardo Detroit Technical Center

Jan 15, 2016
6 Resources
0 Stars
Publicly accessible

High Resolution Ocean Surface Wave Hindcast (US Wave) Data

The development of this dataset was funded by the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, Water Power Technologies Office to improve our understanding of the U.S. wave energy resource and to provide critical information for wave energy project de...

Yang, Z. et al National Renewable Energy Laboratory

Jul 01, 2020
6 Resources
1 Stars
Curated

Metamaterial Unit Cell Database for Marine Energy System Design

This dataset provides a curated Excel-based database of metamaterial unit cells intended to support the marine energy research community in the design and analysis of innovative marine energy systems. The database compiles geometric and mechanical information for a wide range of u...

Celli, P. et al Stony Brook University

Jul 25, 2025
1 Resources
0 Stars
Curated

Reference Model 3 Scaled Geometry (RM3: Wave Point Absorber)

Contains the Reference Model 3 (RM3) scaled scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These scaled geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. The scaled RM3 device ...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
7 Resources
0 Stars
Publicly accessible

Ocean Sentinel Mooring and Environmental Data 2013

Load cell data of Ocean Sentinel (OS) mooring, OS locations data and environmental conditions data (wave, wind, current) measured in the 2013 field test.

C., S. Oregon State University

Jul 29, 2013
6 Resources
0 Stars
Publicly accessible

Bench Testing Data and Report for an Early Prototype Pitch Resonator WEC

This dataset encompasses data and documentation from bench tests conducted on an early prototype of a "pitch resonator" wave energy converter (WEC). The testing aimed to validate numerical models and reduce risks associated with the pitch resonator concept, which is designed to co...

Coe, R. et al Sandia National Laboratories

Aug 09, 2024
4 Resources
0 Stars
Publicly accessible

Wave Measurements taken NW of Culebra Island, Puerto Rico, 2023

Wave and sea surface temperature measurements collected by a Sofar Spotter buoy in 2023. The buoy was deployed on July 27, 2023 at 11:30 UTC northwest of Culebra Island, Puerto Rico, (18.3878 N, 65.3899 W) and recovered on Nov 5, 2023 at 12:45 UTC. Data are saved here in netCDF ...

McVey, J. et al Pacific Northwest National Laboratory

Jul 27, 2023
11 Resources
0 Stars
Curated

Reference Model 3 Full Scale Geometry (RM3: Wave Point Absorber)

Contains the Reference Model 3 (RM3) full scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. This data was genera...