Search MHK Data

TEAMER: Numerical Modeling of WECs to Support OES Task 10

This submission contains the files for reproducing the waves only and sphere test article simulations for the experimental setup (three different wave conditions) associated with the Teamer Request for Technical Support 9 (RFTS 9) fluid dynamics simulations to support the Ocean En...

Meuris, B. et al Sandia National Laboratories

Sep 23, 2024
1 Resources
0 Stars
Publicly accessible

TEAMER: Technical Support for Aquantis (Materials): CRD-21-17762-0

The Aquantis Tidal Power Tug is a unique synthesis of best-available technologies and materials configured as a novel spar vessel to create an optimal platform for tidal stream energy conversion. The Power Tug utilizes an upstream-facing horizontal, 2-bladed rotor. To drive down c...

Swales, H. et al Aquantis, Inc.

Oct 17, 2024
1 Resources
0 Stars
In curation

TEAMER: Ocean Survivability Analysis for a WEC Post-Access Report Data, Newport, OR

E-Wave Technologies LLC worked with the American Bureau of Shipping for the project of ocean survivability analysis of a wave energy converter that powers marine aquaculture. The performance period extended from 9/15/2021 to 6/30/2022 off the coast of Newport, Oregon. The data and...

Lou, J. et al E-Wave Technologies LLC

Jun 30, 2022
55 Resources
0 Stars
In curation

Techno-Economic Optimization of the SurgeWEC Device

This is the post-access report for a Teamer-funded effort to optimize the SurgeWEC device, a near-shore pivoting flap wave energy conversion device used to desalinate water. Parametrically driven cost and performance models enabled an integrated optimization approach at the farm s...

Previsic, M. Re Vision Consulting

Feb 20, 2022
2 Resources
0 Stars
Publicly accessible

TEAMER: Maximal Asymmetric Drag Wave Energy Converter

Boundary element method (BEM) and WEC-Sim analysis of UMass Dartmouth's maximal asymmetric drag wave energy converter (MADWEC), including its tethered ballast system and PTO (power take-off). This project is part of the TEAMER RFTS 6 (request for technical support) program.

MacDonald, D. et al University of Massachusetts Dartmouth

Aug 18, 2023
2 Resources
0 Stars
Awaiting release

UMass 2-Body WEC Techno-Economic Assessment

The University of Massachusetts (UMass) is developing a 2-body wave energy converter (WEC) device that is converting mechanical power into electricity using a mechanical motion rectifier that allows the system to couple to a flywheel. UMass has completed numerical modeling, wave t...

Previsic, M. Re Vision Consulting

Nov 19, 2024
2 Resources
0 Stars
Publicly accessible

TEAMER: Wave Energy Converter SIMulator (WEC-SIM) Support for an Adaptive Wave Energy Converter by Ocean Motion Technologies

Scripts from project git repo + tutorial slide deck generated for the TEAMER RFTS 1 (request for technical support) collaborative project between Ocean Motion Technologies, Inc. and Sandia National Laboratories + National Renewable Energy Laboratory. The project simulates an adapt...

Keester, A. et al Ocean Motion Technologies, Inc.

Jan 29, 2021
3 Resources
0 Stars
Awaiting release

TEAMER: Investigation of Alternate Material Design Methods in WPS Ballast and Hull Systems

Included here are data and results from a study on the use of alternative materials in a floating, two-body Wave Power System (WPS). This study was focused on introduction of fiber-reinforced polymer and concrete in structural elements of the subject WPS, as well as the design and...

Veilleux, M. et al Cardinal Engineering

Apr 22, 2025
2 Resources
0 Stars
Curated

TEAMER: Tidal Currents in San Juan Archipelago, Washington

Re-analyzed acoustic Doppler current profiler (ADCP) data originally collected by NOAA CO-OPS (Center for Operational Oceanographic Products and Services) and equivalent point data from Pacific Northwest National Laboratory's FVCOM (Finite Volume Community Ocean Model) model of th...

Polagye, B. et al University of Washington

Dec 15, 2022
3 Resources
0 Stars
Publicly accessible

TEAMER: Water Tunnel Data from Testing the Pterofin Skimmer Concept

Pterofin's Skimmer concept relies on a flapping and pitching hydrofoil to extract hydrokinetic energy from water flows. The concept aims to utilize unsteady fluid dynamics phenomena (added mass, shed vorticity, and unsteady boundary layer development) to achieve higher lift coeffi...

Jaffa, N. et al Pennsylvania State University, Applied Research Laboratory

Jul 13, 2023
7 Resources
1 Stars
Publicly accessible

TEAMER: Vertical Axies Hydrokinetic Turbine Data, Emrgy Inc. 2022, Post Access Submission

The data herein contains all data collected and used for the Performance Characterization Testing and Model Calibration of a Vertical Axis Hydrokinetic Turbine. The data includes performance data and durability data for the Hydrokinetic Turbine. The device performance data contain...

Cuthbert, T. Emrgy, Inc.

Apr 06, 2022
4 Resources
0 Stars
Publicly accessible

TEAMER: Electrically Engaged Undulation (EEL) System

The Electrically Engaged UnduLation (EEL) system is a buoyancy-driven submersible device for powering oceanographic instruments. Physically, EEL is a slender body whose flexible spine is made up of energy units interconnected by uniaxial hinges. Each unit consists of a pair of pie...

Lu, K. Pyro-E

Dec 01, 2021
2 Resources
0 Stars
Publicly accessible

TEAMER: Additional Degree of Freedom for WEC Model

'Additional Degree of Freedom for WEC' WEC-Sim numerical model from RFTS 1 (request for technical support) TEAMER project. An increase in wave energy converter (WEC) efficiency requires not only consideration of the nonlinear effects in the WEC dynamics and the power take-off (PTO...

McCall, A. et al Dehlsen Associates, LLC

May 26, 2022
2 Resources
0 Stars
Awaiting release

TEAMER: Ocean Energy Sandia WEC Simulation Results

Computational fluid simulations for wave energy converters and supporting materials from Ocean Energy's WEC Buoy TEAMER RFTS 1 (request for technical support) project in collaboration with Sandia National Laboratories. Each file includes images and video of simulation along with t...

Lewis, T. and Chartrand, C. Ocean Energy

Aug 01, 2022
7 Resources
0 Stars
Awaiting release

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Sim Model

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
6 Resources
0 Stars
Publicly accessible

TEAMER: Electrically Engaged Undulation System for Unmanned Underwater Vehicles

This TEAMER RFTS 1 (Request for Technical Support) project supported the flume tank testing of a long range, high endurance unmanned underwater vehicle (UUV) to monitor maritime space. Today, battery-powered remotely operated vehicles (ROVs) lack the duration to make persistent, w...

Lu, K. and Datla, R. Pyro-E

Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

TEAMER: MADWEC Techno-Economic Analysis

The objective of this project was for the facility to conduct a techno-economic assessment (TEA) of the Maximal Asymmetric Drag Wave Energy Converter (MADWEC), developed by the University of Massachusetts Dartmouth (UMass Dartmouth). MADWEC is used for powering remote monitoring a...

Ortega, T. and Baca, E. National Renewable Energy Laboratory

Mar 08, 2024
2 Resources
0 Stars
Publicly accessible

TEAMER: Experimental Characterization of a Laboratory-Scaled Oscillating Surge Wave Energy Converter

This data is a result of an experimental campaign to characterize the hydrodynamics and performance of a laboratory-scale oscillating surge wave energy converter (OSWEC). The device was 85 cm wide, 1.4 meters tall, and 14 cm thick and was tested in the Sea Wave Environmental Lab (...

Lydon, B. et al University of Washington

Apr 05, 2024
1 Resources
0 Stars
Curated

TEAMER: Results of Investigating Structural Design Concepts and Alternative Materials for a Wave Power System

Included here are materials from a study on the design of a three-body Wave Energy Converter (WEC) utilizing a heave plate, dual Power Take Offs (PTOs), and single point mooring. A material trade study has been conducted to evaluate the effects of introducing various metallic and ...

Whitney, C. et al Cardinal Engineering

Apr 27, 2024
4 Resources
0 Stars
Awaiting release

TEAMER: Drifting Hydrophone System Block Diagram and Pre-Amplifier Calibrations

This data release is part of TEAMER RFTS 2, where the Cooperative Institute for Marine Resources Studies (CIMRS) at Oregon State University is performing hardware and software development and integration of four newly designed drifting hydrophone systems for underwater noise measu...

Turnbull, J. et al Pacific Marine Energy Center (PMEC)

Feb 26, 2024
3 Resources
0 Stars
Curated

TEAMER: Numerical Modeling and Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC)

This project focused on developing an automated workflow to evaluate and optimize the iProTech Pitching Inertial Pump (PIP) wave energy converter (WEC) using open-source Python packages and the MATLAB/Simulink tool, WEC-Sim. The process involved parameterizing key design variables...

Wynn, N. et al National Renewable Energy Laboratory

Apr 11, 2024
1 Resources
0 Stars
Publicly accessible

TEAMER: Vertical Axis Hydrokinetic Turbine Array Modeling And Optimization Data

This dataset from Emrgy Inc., in collaboration with Sandia National Laboratories, includes integration of modular vertical axis hydrokinetic (HK) turbines into a higher fidelity canal hydraulic model. This submission contains all data collected and used for the Vertical Axis Hydro...