Search MHK Data

TEAMER: Numerical Modeling and Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC)

This project focused on developing an automated workflow to evaluate and optimize the iProTech Pitching Inertial Pump (PIP) wave energy converter (WEC) using open-source Python packages and the MATLAB/Simulink tool, WEC-Sim. The process involved parameterizing key design variables...

Wynn, N. et al National Renewable Energy Laboratory

Apr 11, 2024
1 Resources
0 Stars
Publicly accessible

TEAMER: Experimental Characterization of a Laboratory-Scaled Oscillating Surge Wave Energy Converter

This data is a result of an experimental campaign to characterize the hydrodynamics and performance of a laboratory-scale oscillating surge wave energy converter (OSWEC). The device was 85 cm wide, 1.4 meters tall, and 14 cm thick and was tested in the Sea Wave Environmental Lab (...

Lydon, B. et al University of Washington

Apr 05, 2024
1 Resources
0 Stars
Curated

TEAMER: Water Tunnel Data from Testing the Pterofin Skimmer Concept

Pterofin's Skimmer concept relies on a flapping and pitching hydrofoil to extract hydrokinetic energy from water flows. The concept aims to utilize unsteady fluid dynamics phenomena (added mass, shed vorticity, and unsteady boundary layer development) to achieve higher lift coeffi...

Jaffa, N. et al Pennsylvania State University, Applied Research Laboratory

Jul 13, 2023
7 Resources
1 Stars
Publicly accessible

Advanced Wave-to-Wire OWC model in WEC-Sim

Accurate numerical models are crucial for the development of wave energy converter (WEC) technologies, providing the means for power production and lifetime assessment, site selection, and design of mooring lines, PTO systems and controllers, among other aspects. The present proje...

Peñalba, M. et al Mondragon Goi Eskola Politeknikoa

Dec 20, 2024
1 Resources
0 Stars
In curation

National Marine Renewable Energy Center Upgrades LUPA

The data provided is part of a power take off damping optimization study. The power take off damping coefficient was swept from 0 to approximately 7000 N/m/s during a single regular wave test with a real time control of the motor/generator. The generated power from the LUPA (Lab U...

Robertson, B. et al Oregon State University

Oct 12, 2022
5 Resources
0 Stars
Publicly accessible

RANS Simulation VBM of Single Lab Scaled DOE RM1 MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. The lab-scaled DOE RM1 is a re-design geometry, based of the full scale DOE RM1 design, producing same po...

Javaherchi, T. et al University of Washington (NNMREC)

Apr 15, 2014
8 Resources
0 Stars
Publicly accessible

RANS Simulation VBM of Array of Three Coaxial Lab Scaled DOE RM1 MHK Turbine with 5D Spacing

Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for the Reynolds Averaged Navier-Stokes (RANS) simulation of three coaxially located lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CF...

Javaherchi, T. University of Washington

Jun 08, 2016
9 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Preliminary Turbine Hydrodynamic Design

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
1 Resources
0 Stars
Publicly accessible

TEAMER: Supporting model output files for Environmental Compliance Framework for Floating Tidal Turbines, Cook Inlet, AK

Orbital Marine Power (Orbital) is seeking to deploy their floating tidal technology in US waters and has considered the possibility of deploying in temperate waters including the Pacific Northwest (PNW) and the Western Passage, Maine. It has become apparent that some of the most p...

Wang, T. et al Pacific Northwest National Laboratory

Mar 01, 2023
5 Resources
0 Stars
Publicly accessible

TEAMER Extreme Events Modeling for the MARMOK-OWC Wave Energy Converter

Through the TEAMER program, Sandia National Laboratories (SNL) collaborated with IDOM Incorporated to study their MARMOK-Oscillating Water Column (MARMOK-OWC) wave energy conversion device. The study yielded a quantitative understanding of hydrodynamic pressures on the oscillating...

De Miguel Para, B. et al IDOM Incorporated

Dec 27, 2024
2 Resources
0 Stars
Publicly accessible

TEAMER: Numerical Analysis of a Novel Nearshore at-surface WEC

This dataset comprises of raw numerical simulation data conducted on a novel nearshore at-surface wave energy converter (WEC). The testing aimed and was intended to provide a calibration then optimization regime through numerical analysis. This project is part of the TEAMER RFTS ...

Villarreal, A. et al Laminar Scientific Inc.

Jan 15, 2024
1 Resources
0 Stars
In curation

RANS Simulation VBM of Single Full Scale DOE RM1 MHK Turbine

Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for Reynolds Averaged Navier-Stokes (RANS) simulation of a single full scale DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. In this...

Javaherchi, T. and Aliseda, A. University of Washington

Apr 10, 2013
8 Resources
0 Stars
Publicly accessible

TEAMER: Tidal Energy Resource Characterization and Model Validation via the Assessment of Distributed Current Measurements from microFloat Swarms, Data and Post-Access Report

This project evaluated how high-resolution, spatially distributed field data can be used to refine and validate site-scale hydrodynamic simulations of tidal channels. Use of such spatially-distributed field observations or site-scale hydrodynamic simulations will be needed for pro...

University of Washington (NNMREC)

Aug 20, 2020
0 Resources
0 Stars
Curated

Hawaii Wave Surge Energy Converter (HAWSEC) OSU O.H. Hinsdale Basin

The following information and metadata applies to both the Phase I (Hydrodynamics) and Phase II (Full System Power Take-Off) zip folders which contain testing data from the OSU (Oregon State University) O.H. Hinsdale Wave Research Laboratory, from both OSU and the University of Ha...

Rajagopalan, K. et al University of Hawaii at Manoa

Jun 22, 2022
3 Resources
0 Stars
Awaiting release

Performance estimation of resonance-enhanced dual-buoy wave energy converter using coupled time-domain simulation

This paper presents the modeling methodology and performance evaluation of the resonance-enhanced dual-buoy WEC (Wave Energy Converter) by HEM (hydrodynamic & electro-magnetic) fully-coupled-dynamics time-domain-simulation program. The numerical results are systematically compared...

Kang, H. et al Texas A&M University

Aug 31, 2020
3 Resources
0 Stars
Publicly accessible

Modeled Hourly Tidal Current Velocities, Directions, and Heights from May 1 September 1, 2005 at Two Points Near East Forelands and Tyonek in Cook Inlet, Alaska

This dataset includes modeled tidal current velocities, direction and depth at two locations in East and North Forelands (60.716, 151.434 and 61.024, 151.157) near Nikiski and Tyonek, respectively, in Cook Inlet, Alaska. Data from two grid cells were provided by the Pacific Northw...

Bond, B. et al University of Alaska Fairbanks

Oct 05, 2022
3 Resources
1 Stars
Publicly accessible

TEAMER: Wave and Current Energy Converter Modeling Workshop Materials

This dataset contains the full set of training materials used in a marine hydrokinetic (MHK) modeling workshop conducted by Sandia National Laboratories for the University of Alaska Fairbanks, funded through the U.S. Department of Energy's TEAMER program. The workshop focused on t...

McWilliams, S. et al Sandia National Laboratories

Apr 18, 2025
7 Resources
0 Stars
Curated

Aquantis 2.5 MW Ocean Current Generation Device Design Details

Items in this submission provide the detailed design of the Aquantis Ocean Current Turbine and accompanying analysis documents, including preliminary designs, verification of design reports, CAD drawings of the hydrostatic drivetrain, a test plan and an operating conditions simula...

Banko, R. et al Dehlsen Associates, LLC

Jun 03, 2015
22 Resources
0 Stars
Publicly accessible

TEAMER: Sandia and CalWave Torque Spring Assessment

Power-take-off (PTO) systems for wave energy converters (WEC) require restoring forces for efficient hydrodynamic as well as mechanical to electric power transfer. Implementation of an effective spring mechanism that can provide a restoring torque on e.g. a rotational, winch type ...

Boerner, T. et al CalWave Power Technologies Inc.

Apr 01, 2022
3 Resources
0 Stars
Awaiting release

MBARI WEC 2021 deployment

This dataset includes data from the Monterey Bay Aquarium Research Institute (MBARI) wave energy converter (WEC) and a nearby located Sofar Spotter buoy. The Monterey Bay Aquarium Research Institute has developed and deployed a small two-body point absorber wave energy device suit...

Coe, R. et al Sandia National Laboratories

Oct 12, 2021
4 Resources
0 Stars
Publicly accessible

Laboratory Upgrade Point Absorber WEC-Sim Model with MoorDyn Moorings

This dataset includes a WEC-Sim and MoorDyn model of the Laboratory Upgrade Point Absorber (LUPA). LUPA is an open-source wave energy converter designed and tested by Oregon State University. The files provided here constitute a stable LUPA configuration with three mooring lines. ...

Mcconnell, A. Oregon State University

Oct 08, 2024
2 Resources
0 Stars
Publicly accessible

Modeling and Performance Data for Heaving Buoy Wave Energy Converter with a Compressible Degree of Freedom (CDOF)

Modeling and performance data in Matlab data file (.mat) containing 3 structures (WEC model, simRes_sr and simRes_fix), and a pdf document describing the model, the simulations, and the analysis that has been carried out.

Bacelli, G. Sandia National Laboratories

Sep 28, 2016
2 Resources
0 Stars
Publicly accessible

TEAMER: CFD Data on a Vertical Axis Wave Turbine

In this study from January to July of 2023, different variations of the original geometry of a vertical-axis wave turbine (VAWT) were generated and evaluated for hydrodynamic power efficiency using computational fluid dynamics (CFD). The key geometrical parameters considered in th...

Yang, Y. et al University of Texas Rio Grande Valley

Jul 31, 2023
37 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC Final Technical Report

This project successfully developed methods for numerical modeling of sediment transport phenomena around rigid objects resting on or near the ocean floor. These techniques were validated with physical testing using actual sediment in a large wave tank. These methods can be applie...

Morrow, M. et al M3 Wave

May 31, 2018
1 Resources
0 Stars
Publicly accessible

TEAMER: Electrically Engaged Undulation System for Unmanned Underwater Vehicles

This TEAMER RFTS 1 (Request for Technical Support) project supported the flume tank testing of a long range, high endurance unmanned underwater vehicle (UUV) to monitor maritime space. Today, battery-powered remotely operated vehicles (ROVs) lack the duration to make persistent, w...

Lu, K. and Datla, R. Pyro-E

Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

1 2 Next >>