Search MHK Data

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Sim Model

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
6 Resources
0 Stars
Publicly accessible

TEAMER: Simulation Data of Displacement and Thrust for the Electrically Engaged UnduLation (EEL) Marine Energy System

This dataset contains time-series simulation data generated by Pyro-E LLC using Simcenter STAR-CCM+ that characterizes the hydromechanical behavior of the Electrically Engaged unduLation (EEL) marine energy system. Data include measurements of tail displacements in the X and Z dir...

Lu, K. et al Oak Ridge National Laboratory

Jan 06, 2023
3 Resources
0 Stars
Curated

Experimental Wave Desalination Data with Variable Feed and Pressure Input

This is the raw data collected from various experiments seeking to characterize reverse osmosis membrane performance under dynamic feed conditions (i.e., varying feed pressure and flow rate) such as those that might be experienced in a wave desalination system. This data was colle...

Sitterley, K. et al National Renewable Energy Laboratory

Jul 29, 2025
8 Resources
0 Stars
Curated

TEAMER: OSU X Hinsdale & Sandia LUPA Uncertainty Testing

This processed data is from TEAMER testing through RFTS 7 at the O.H. Hinsdale Wave Research Laboratory in Corvallis, Oregon. This testing was conducted by Oregon State University (OSU) and Sandia National Laboratories in October and November 2023. The Laboratory Upgrade Point Abs...

Robertson, B. et al Oregon State University

Oct 19, 2023
6 Resources
0 Stars
Curated

PacWave South SeaRAY k2 Risk Registers

The SeaRAY is a deployable power system for maritime sensors, monitoring equipment, communications, unmanned underwater vehicles, and other similar payloads. This project is to design, deliver, and test a prototype low-power WEC that lowers the total cost of ownership and provides...

Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Sep 29, 2023
12 Resources
0 Stars
Curated

HERO WEC V1.0 SolidWorks Model

The attached zip file includes a SolidWorks pack-and-go assembly of NREL's HERO WEC (hydraulic and electric reverse osmosis wave energy converter) V1.0. This model does not include all aspects of the design (i.e. RO (reverse osmosis) system, electrical enclosure, hose, cable) it o...

Jenne, S. National Renewable Energy Laboratory

Aug 12, 2022
2 Resources
0 Stars
Publicly accessible

CalWave First Iterative PTO Description

This documents summarizes a preliminary first iterative design of a PTO device developed by CalWave. The document includes controls, hydraulic, and electric architectures from the first iteration of the CalWave PTO design that match requirements set out by the "CalWave Holistic PT...

Kojimoto, N. et al CalWave Power Technologies Inc.

Dec 06, 2021
2 Resources
0 Stars
Awaiting release

Tidal Energy Resource Characterization, Velocity and Turbulence Measurements, Processed Data, Cook Inlet, AK, 2021

This submission contains processed datasets from a long-term deployment of 3 moorings and a transect survey of the proposed tidal energy site off the East Forelands in Cook Inlet, AK. The long-term mooring datasets were created from 8 instruments mounted on a Terrasond High Ener...

McVey, J. and Kilcher, L. Pacific Northwest National Laboratory

Aug 31, 2021
29 Resources
1 Stars
Curated

HERO WEC V1.0 2024 WEC-Sim Detailed Simulation Runs and Summary Data

This dataset includes results from simulations of NREL's hydraulic and electric reverse osmosis wave energy converter (HEREO WEC). Simulation runs include 135 wave cases that were based on the updated WEC-Sim model, which is linked below. The data represented in this repository i...

Panzarella, J. et al National Renewable Energy Laboratory

Jul 01, 2024
6 Resources
0 Stars
Publicly accessible

StingRAY WEC Risk Register

Risk Registers for major subsystems of the StingRAY WEC completed in compliance with the DOE Risk Management Framework developed by NREL.

Rhinefrank, K. Columbia Power Technologies, Inc.

Feb 24, 2017
18 Resources
0 Stars
Publicly accessible

Unobtrusive Multi-static Serial LiDAR Imager (UMSLI) Dataset

The dataset contains the data from the field deployment of the Unobtrusive Multi-static Serial LiDAR Imager (UMSLI) system at PNNL-Sequim test site in 2017. The dataset contains scanning of manmade models of baracuda and turtles as well as technical target placed in the field of v...

Dalgleish, F. and Ouyang, B. Florida Atlantic University

Sep 22, 2023
9 Resources
0 Stars
Curated

HERO WEC V1 Upgrades SolidWorks Models (WEC, RO System, and Submersible Pump Housing)

The attached zip files include SolidWorks pack-and-go assemblies of NREL's HERO WEC (hydraulic and electric reverse osmosis wave energy converter), the reverse osmosis (RO) assembly, and the submersible pump assembly that is used to provide flow to the RO assembly in the electric ...

Jenne, S. and Panzarella, J. National Renewable Energy Laboratory

Jan 08, 2024
4 Resources
0 Stars
Publicly accessible

MBARI WEC 2021 deployment

This dataset includes data from the Monterey Bay Aquarium Research Institute (MBARI) wave energy converter (WEC) and a nearby located Sofar Spotter buoy. The Monterey Bay Aquarium Research Institute has developed and deployed a small two-body point absorber wave energy device suit...

Coe, R. et al Sandia National Laboratories

Oct 12, 2021
4 Resources
0 Stars
Publicly accessible

StingRAY Structural Optimization Final Technical Report Appendices

The protected data appendices to the public Final Technical Report. The overall project objective is to materially decrease the leveled cost of energy (LCOE) of the Columbia Power (CPower) StingRAY utility-scale wave energy converter (WEC). This will be achieved by reducing stru...

Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Aug 05, 2020
16 Resources
0 Stars
Awaiting release

Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging Year 4 Software and Data

This dataset contains software, sensor data, and experimental recordings generated during Year 4 of a DOE-funded project focused on the co-design of marine energy converters and autonomous underwater vehicle (AUV) docking and recharging systems. The data were collected during expe...

Hollinger, G. et al Oregon State University

Oct 15, 2025
9 Resources
0 Stars
Curated

TEAMER: Electrically Engaged Undulation System for Unmanned Underwater Vehicles

This TEAMER RFTS 1 (Request for Technical Support) project supported the flume tank testing of a long range, high endurance unmanned underwater vehicle (UUV) to monitor maritime space. Today, battery-powered remotely operated vehicles (ROVs) lack the duration to make persistent, w...

Lu, K. and Datla, R. Pyro-E

Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

TEAMER: MADWEC Techno-Economic Analysis

The objective of this project was for the facility to conduct a techno-economic assessment (TEA) of the Maximal Asymmetric Drag Wave Energy Converter (MADWEC), developed by the University of Massachusetts Dartmouth (UMass Dartmouth). MADWEC is used for powering remote monitoring a...

Ortega, T. and Baca, E. National Renewable Energy Laboratory

Mar 08, 2024
2 Resources
0 Stars
Publicly accessible

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Test Logs and Results

Hagmuller, A. et al AquaHarmonics, Inc.

Dec 16, 2021
10 Resources
0 Stars
Curated

Focusing Wave Energy for Wave Energy Converter Applications

Wave tank tests at Stevens Institute of Technology quantified the ability of near-surface platforms to concentrate wave energy over the platform. Due to the instantaneous change in water depth, mass, energy, and power are conserved in this process. The energy and power concentrat...

Raftery, M. Stevens Institute of Technology

Aug 10, 2010
7 Resources
0 Stars
Publicly accessible

PacWave Site Observations

The PacWave Site Observations submission contains raw and near-real-time meteorological and oceanic measurements at the PacWave wave energy test site. PacWave is an open-ocean testing facility operated by Oregon State University, located off the coast of Newport, Oregon. The test ...

Hembrough, B. et al Oregon State University

Jan 01, 2020
4 Resources
0 Stars
Curated

HERO WEC Bills of Materials: WEC, RO System, and Submersible Pump

This submission includes detailed Bills of Materials for the NREL-designed and built Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC), as well as the reverse osmosis assembly and submersible pump that are used in the HERO WEC. The WEC file is specific to th...

Jenne, S. and Panzarella, J. National Renewable Energy Laboratory

Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

StingRAY Updated WEC Risk Registers

Updated Risk Registers for major subsystems of the StingRAY WEC completed according to the methodology described in compliance with the DOE Risk Management Framework developed by NREL.

Rhinefrank, K. and Ondusko, M. Columbia Power Technologies, Inc.

Jun 27, 2018
17 Resources
0 Stars
Publicly accessible

RM3 Wave Tank Validation Model

An approximately 1/75th scale point absorber wave energy absorber was built to validate the testing systems of a 16k gallon single paddle wave tank. The model was build based on the RM3 design and incorporated a linear position sensor, a force transducer, and wetness detection sen...

Candon, C. and Fao, R. National Renewable Energy Laboratory

Jul 31, 2023
3 Resources
0 Stars
Publicly accessible

Tidal Energy Resource Characterization, Bottom Lander Measurements, Cook Inlet, AK, 2021

These datasets are from tidal resource characterization measurements collected on the Terrasond High Energy Oceanographic Mooring (THEOM) from 1 July 2021 to 30 August 2021 (60 days) in Cook Inlet, Alaska. The lander was deployed at 60.7207031 N, 151.4294998 W in ~50 m of water. ...

Kilcher, L. and McVey, J. National Renewable Energy Laboratory

Jul 01, 2021
25 Resources
0 Stars
Publicly accessible

TEAMER: Laboratory Upgrade Point Absorber v2 CAD Model and Bill of Materials

The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD) files are provided here in two forms: the original SOLIDWORKS (2024) model as "LUPA SOLIDWORKS.zip" and as a STEP fi...