Search MHK Data

TEAMER: Dynamometer Testing of a Magnetically Geared Electrical Generator

Ocean Renewable Power Company's (ORCP) RivGen device is a horizontal cross-flow turbine featuring a proprietary power takeoff unit. This system has been proven in real-world conditions in Alaska and is now the longest operating hydrokinetic project in the Americas. ORPC systems ty...

Bassett, C. and Gibbs, P. University of Washington Applied Physics Lab

Aug 14, 2025
5 Resources
0 Stars
Curated

TEAMER: Over-voltage Protection of Direct Drive Wave Power System (WPS) Electrical Components Restricted Release

Restricted release data and results from a study on methods to design and optimize an over-voltage protection (OVP) system for a floating, two-body Wave Power System (WPS). The work has been performed by assessing the conditions under which hydrodynamically induced transient over-...

Swindler, S. et al Cardinal Engineering

May 01, 2026
4 Resources
0 Stars
Curated

TEAMER: Over-voltage Protection of Direct Drive Wave Power System (WPS) Electrical Components Public Release

Public data, results, and final report from a study on methods to design and optimize an over-voltage protection (OVP) system for a floating, two-body Wave Power System (WPS). The work has been performed by assessing the conditions under which hydrodynamically induced transient ov...

Swindler, S. et al Cardinal Engineering

May 01, 2026
10 Resources
0 Stars
Curated

TEAMER: Numerical Modeling, Analysis, and Optimization of Oscillo-Drive Wave Energy Converter

A numerical modeling and optimization framework has been developed for the Oscillo-Drive Wave Energy Converter (WEC) being developed by Wave Water Works LLC, with technical assistance from Florida Atlantic University under the DOE TEAMER program. The primary objective was to estab...

Dhanak, M. et al Wave Water Works LLC / Florida Atlantic University

Aug 20, 2026
1 Resources
0 Stars
Curated

TEAMER: Oscilla Power Triton Wave Energy Converter

Oscilla Power (OPI) is developing the Triton wave energy converter architecture. This system is a two-body, multi-mode point absorber consisting of a surface float connected to a submerged ring via three tendons. As the surface float is articulated by waves, the two bodies react a...

Mundon, T. et al Oscilla Power, Inc.

Oct 20, 2026
3 Resources
0 Stars
Curated

TEAMER: Experimental Characterization of a Laboratory-Scaled Oscillating Surge Wave Energy Converter

This data is a result of an experimental campaign to characterize the hydrodynamics and performance of a laboratory-scale oscillating surge wave energy converter (OSWEC). The device was 85 cm wide, 1.4 meters tall, and 14 cm thick and was tested in the Sea Wave Environmental Lab (...

Lydon, B. et al University of Washington

Apr 05, 2024
9 Resources
0 Stars
Curated

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Sim Model

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
6 Resources
0 Stars
Publicly accessible

TEAMER: Laboratory Evaluation of Dual-Function Oscillating Water Column with Slotted Breakwater O.H. Hinsdale Wave Research Laboratory

This dataset documents a series of controlled laboratory experiments conducted at the O.H. Hinsdale Wave Research Laboratory to evaluate the performance of a dual-function Oscillating Water Column (OWC) system integrated with a slotted breakwater. The experiments aimed to characte...

Walker, M. and Lomonaco, P. University of Hawaii at Manoa

Aug 02, 2025
11 Resources
0 Stars
Curated

TEAMER: Biofouling and Corrosion Study for a Novel Linear Guided Wave Energy Converter

This dataset contains data recordings used to generate the figures included in the Post Access Report for the TEAMER project "Biofouling and Corrosion Study for a Novel Linear Guided Wave Energy Converter". The overall objective of this project was to examine the reliability and p...

Lou, J. et al E-Wave Technologies LLC

Dec 03, 2025
4 Resources
0 Stars
Curated

TEAMER: 1:4 Scale Halona Mooring Design Study Test Data and Processed Data

This report reviews the successful completion of physical model testing of the 100-Watt scale model of the novel oscillating water column type wave energy converter known as Halona. Testing was conducted on 2 different geometries, as well as testing of 2 different mooring configur...

Mercier, R. University of Hawaii at Manoa

Aug 29, 2022
7 Resources
0 Stars
In curation

TEAMER: Sandia and CalWave Torque Spring Assessment

Power-take-off (PTO) systems for wave energy converters (WEC) require restoring forces for efficient hydrodynamic as well as mechanical to electric power transfer. Implementation of an effective spring mechanism that can provide a restoring torque on e.g. a rotational, winch type ...

Boerner, T. et al CalWave Power Technologies Inc.

Apr 01, 2022
3 Resources
0 Stars
Awaiting release

TEAMER: Deeply Embedded Ring Anchor Fatigue Life Optimization

The data provided in this submission contain the analysis input files and result post-processing spreadsheets and scripts to perform the CFD analysis, load case development, strength FEA, fatigue FEA, and optimization tasks outlined in the project report. Below is a summary of the...

Mane, S. et al Stress Engineering Services, Inc.

Jun 15, 2026
4 Resources
0 Stars
Curated

TEAMER: CalWave UMaine 2021 Tank Testing

This is the data submission to the teamer report for RFTS 1 (request for technical support) during which tank testing at UMaine W2 tank occurred. This submission includes the relevant information and recorded data of CalWave's UMaine wave tank testing conducted under TEAMER Reques...

Boerner, T. CalWave Power Technologies Inc.

Apr 01, 2021
1 Resources
0 Stars
Awaiting release

TEAMER: Additional Degree of Freedom for WEC Model

'Additional Degree of Freedom for WEC' WEC-Sim numerical model from RFTS 1 (request for technical support) TEAMER project. An increase in wave energy converter (WEC) efficiency requires not only consideration of the nonlinear effects in the WEC dynamics and the power take-off (PTO...

McCall, A. et al Dehlsen Associates, LLC

May 26, 2022
3 Resources
0 Stars
Curated

TEAMER: Technical Support for Aquantis (Materials): CRD-21-17762-0

The Aquantis Tidal Power Tug is a unique synthesis of best-available technologies and materials configured as a novel spar vessel to create an optimal platform for tidal stream energy conversion. The Power Tug utilizes an upstream-facing horizontal, 2-bladed rotor. To drive down c...

Swales, H. et al Aquantis, Inc.

Oct 17, 2024
3 Resources
0 Stars
Curated

TEAMER: Assessing Structural Integrity of a Self-Reactive Point Absorber Subjected to Extreme Sea Conditions

This submission contains the numerical modeling data and analysis results generated for the structural integrity assessment of a self-reactive two-body point absorber wave energy converter (WEC) designed by the University of Michigan. The dataset includes hydrodynamic outputs from...

Zhang, S. et al University of Michigan

Jul 30, 2025
1 Resources
0 Stars
Curated

TEAMER: Original HANNA Mono-Radial Turbine Post Access Report

Final report on a TEAMER RFTS 2 (request for technical support) study undertaken by Alden Research Laboratory for the Mono-radial turbine invented by John Clark Hanna DBA: Hanna Wave Energy Primary Drives. The study is a predictive numerical and CFD (computational fluid dynamics) ...

Hanna, J. Hanna Wave Energy Primary Drives

Mar 10, 2022
1 Resources
0 Stars
Publicly accessible

TEAMER: xWave Real Time IMU Optimization for Advanced Controls

CalWave is developing a wave energy converter (WEC) called xWave that operates fully submerged and is classified as a type of submerged pressure differential WEC. As ocean waves pass over the submerged wave buoy, a pressure differential is created, exciting the absorber in multipl...

Spinneken, J. and Boerner, T. CalWave Power Technologies Inc.

Apr 18, 2023
2 Resources
0 Stars
Awaiting release

TEAMER: Numerical Model of IProTech PIP WEC Device

iProTech PIP wave energy converter (WEC) is a slack moored, single hull device with no moving parts in the water, joints or bearings. This submission includes data of the simulation, reports, and code for the iProTech PIP (WEC) project. The organization of the data included in the...

Ogden, D. et al IProTech

Nov 02, 2021
3 Resources
0 Stars
Curated

TEAMER: UMass 2-Body WEC Techno-Economic Assessment

The University of Massachusetts (UMass) is developing a 2-body wave energy converter (WEC) device that is converting mechanical power into electricity using a mechanical motion rectifier that allows the system to couple to a flywheel. UMass has completed numerical modeling, wave t...

Previsic, M. Re Vision Consulting

Nov 19, 2024
2 Resources
0 Stars
Curated

TEAMER: CalWave xWave New Technology Qualification and Path to Certification Final Report

CalWave is developing a wave energy converter (WEC) called xWave, which operates fully submerged and is classified as a submerged pressure differential type. As ocean waves pass over the submerged wave buoy, a pressure differential is created, exciting the absorber in multiple deg...

Petcovic, D. and Zhang, S. CalWave Power Technologies Inc.

Oct 31, 2022
2 Resources
0 Stars
Publicly accessible

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Test Logs and Results

Hagmuller, A. et al AquaHarmonics, Inc.

Dec 16, 2021
10 Resources
0 Stars
Curated

TEAMER: Heterogeneous Wave Energy Converter Test Data

This dataset was generated during the Heterogeneous Wave Energy Converter (HetWECs) experimental campaign conducted at the O.H. Hinsdale Direction Wave Basin at Oregon State University. Experiments include system identification, hydrodynamics, and power take-off (PTO) tests. The ...

Vitale, O. et al Cornell University

Jun 27, 2025
5 Resources
0 Stars
Curated

TEAMER: Maximal Asymmetric Drag Wave Energy Converter

Boundary element method (BEM) and WEC-Sim analysis of UMass Dartmouth's maximal asymmetric drag wave energy converter (MADWEC), including its tethered ballast system and PTO (power take-off). This project is part of the TEAMER RFTS 6 (request for technical support) program.

MacDonald, D. et al University of Massachusetts Dartmouth

Aug 18, 2023
3 Resources
0 Stars
Curated

TEAMER: FOSWEC Mooring Modeling and Analysis, Post Access Report and Data

Floating oscillating surge wave energy converters (FOSWECs) offer several advantages over bottom-hinged oscillating surge wave energy converters, including large wave potential at deep-water sites with fewer permitting and environmental concerns outside territorial waters. As a te...

Housner, S. et al Virginia Tech

Jun 14, 2022
10 Resources
0 Stars
Publicly accessible

1 2 Next >>