Search MHK Data

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Sim Model

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
6 Resources
0 Stars
Publicly accessible

TEAMER: Additional Degree of Freedom for WEC Model

'Additional Degree of Freedom for WEC' WEC-Sim numerical model from RFTS 1 (request for technical support) TEAMER project. An increase in wave energy converter (WEC) efficiency requires not only consideration of the nonlinear effects in the WEC dynamics and the power take-off (PTO...

McCall, A. et al Dehlsen Associates, LLC

May 26, 2022
2 Resources
0 Stars
Awaiting release

TEAMER: Triton Systems Oscillating Water Column Modeling Data and Report

This dataset provides the output of six Wave Energy Converter Simulator (WEC-Sim) simulations and accompanying documentation for the modeling of Triton Systems' oscillating water column (OWC) system at tank scale (validated using available data for tuning the model, Tests 1-2) and...

Forbush, D. et al Sandia National Laboratories

Aug 30, 2024
3 Resources
0 Stars
Awaiting release

TEAMER AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Test Logs and Results

Hagmuller, A. et al AquaHarmonics, Inc.

Dec 16, 2021
9 Resources
0 Stars
Publicly accessible

TEAMER: Drifting Hydrophone System Block Diagram and Pre-Amplifier Calibrations

This data release is part of TEAMER RFTS 2, where the Cooperative Institute for Marine Resources Studies (CIMRS) at Oregon State University is performing hardware and software development and integration of four newly designed drifting hydrophone systems for underwater noise measu...

Turnbull, J. et al Pacific Marine Energy Center (PMEC)

Feb 26, 2024
3 Resources
0 Stars
Curated

TEAMER: OpenFAST Modeling and Simulation of the Aquantis AQ10 Marine Hydrokinetic Turbine

This dataset was developed under TEAMER technical support (CRD-21-17763-0) to model the Aquantis AQ10, a spar buoy-based marine hydrokinetic turbine, using the OpenFAST simulation framework. The project transitioned modeling from the proprietary Tidal Bladed tool to OpenFAST to en...

Swales, H. and Tran, T. Aquantis, Inc.

Jul 31, 2025
3 Resources
1 Stars
Curated

TEAMER: MADWEC Techno-Economic Analysis

The objective of this project was for the facility to conduct a techno-economic assessment (TEA) of the Maximal Asymmetric Drag Wave Energy Converter (MADWEC), developed by the University of Massachusetts Dartmouth (UMass Dartmouth). MADWEC is used for powering remote monitoring a...

Ortega, T. and Baca, E. National Renewable Energy Laboratory

Mar 08, 2024
2 Resources
0 Stars
Publicly accessible

TEAMER: Laboratory Upgrade Point Absorber v2 CAD Model and Bill of Materials

The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD) files are provided here in two forms: the original SOLIDWORKS (2024) model as "LUPA SOLIDWORKS.zip" and as a STEP fi...

Robertson, B. et al Oregon State University

Apr 22, 2025
9 Resources
0 Stars
Curated

UMass 2-Body WEC Techno-Economic Assessment

The University of Massachusetts (UMass) is developing a 2-body wave energy converter (WEC) device that is converting mechanical power into electricity using a mechanical motion rectifier that allows the system to couple to a flywheel. UMass has completed numerical modeling, wave t...

Previsic, M. Re Vision Consulting

Nov 19, 2024
2 Resources
0 Stars
Publicly accessible

TEAMER: Results of Investigating Structural Design Concepts and Alternative Materials for a Wave Power System

Included here are materials from a study on the design of a three-body Wave Energy Converter (WEC) utilizing a heave plate, dual Power Take Offs (PTOs), and single point mooring. A material trade study has been conducted to evaluate the effects of introducing various metallic and ...

Whitney, C. et al Cardinal Engineering

Apr 27, 2024
4 Resources
0 Stars
Awaiting release

TEAMER: Optimization of a Wave Power System (WPS) Structure and Interfaces for Generator Integration

Data, results, and final report from a study on methods to structurally integrate permanent magnet generator (PMG) variants within a floating, two-body Wave Power System (WPS). This study also demonstrated the incorporation of a novel Localized Airgap Reduction System (LARS), whic...

Batol, D. et al Cardinal Engineering

Nov 24, 2025
10 Resources
0 Stars
Curated

TEAMER: Original HANNA Mono-Radial Turbine Post Access Report

Final report on a TEAMER RFTS 2 (request for technical support) study undertaken by Alden Research Laboratory for the Mono-radial turbine invented by John Clark Hanna DBA: Hanna Wave Energy Primary Drives. The study is a predictive numerical and CFD (computational fluid dynamics) ...

Hanna, J. Hanna Wave Energy Primary Drives

Mar 10, 2022
1 Resources
0 Stars
Publicly accessible

TEAMER: Simulation Data of Displacement and Thrust for the Electrically Engaged UnduLation (EEL) Marine Energy System

This dataset contains time-series simulation data generated by Pyro-E LLC using Simcenter STAR-CCM+ that characterizes the hydromechanical behavior of the Electrically Engaged unduLation (EEL) marine energy system. Data include measurements of tail displacements in the X and Z dir...

Lu, K. et al Oak Ridge National Laboratory

Jan 06, 2023
2 Resources
0 Stars
Curated

TEAMER: Experimental Validation and Analysis of Deep Reinforcement Learning Control for Wave Energy Converters

Through this TEAMER project, Michigan Technological University (MTU) collaborated with Oregon State University (OSU) to test the performance of a Deep Reinforcement Learning (DRL) control in the wave tank. Unlike model-based controls, DRL control is model-free and can directly max...

Zou, S. et al Michigan Technological University

Mar 07, 2025
7 Resources
0 Stars
Curated

TEAMER: Numerical Analysis of a Novel Nearshore at-surface WEC

This dataset comprises of raw numerical simulation data conducted on a novel nearshore at-surface wave energy converter (WEC). The testing aimed and was intended to provide a calibration then optimization regime through numerical analysis. This project is part of the TEAMER RFTS ...

Villarreal, A. et al Laminar Scientific Inc.

Jan 15, 2024
1 Resources
0 Stars
Curated

TEAMER: Advanced Wave-to-Wire OWC model in WEC-Sim

Accurate numerical models are crucial for the development of wave energy converter (WEC) technologies, providing the means for power production and lifetime assessment, site selection, and design of mooring lines, PTO systems and controllers, among other aspects. This project aims...

Peñalba, M. et al Mondragon Goi Eskola Politeknikoa

Dec 20, 2024
5 Resources
0 Stars
Curated

TEAMER: Assessing Structural Integrity of a Self-Reactive Point Absorber Subjected to Extreme Sea Conditions

This submission contains the numerical modeling data and analysis results generated for the structural integrity assessment of a self-reactive two-body point absorber wave energy converter (WEC) designed by the University of Michigan. The dataset includes hydrodynamic outputs from...

Zhang, S. et al University of Michigan

Jul 30, 2025
1 Resources
0 Stars
Curated

TEAMER: Dynamometer Testing of a Magnetically Geared Electrical Generator

Ocean Renewable Power Company's (ORCP) RivGen device is a horizontal cross-flow turbine featuring a proprietary power takeoff unit. This system has been proven in real-world conditions in Alaska and is now the longest operating hydrokinetic project in the Americas. ORPC systems ty...

Bassett, C. and Gibbs, P. University of Washington Applied Physics Lab

Aug 14, 2025
5 Resources
0 Stars
Curated

TEAMER: Mass of Water Turbine Current Energy Converter CFD Results

The CFD (computational fluid dynamics) results for the Mass of Water Turbine (MOWT) current energy converter from MWNW Consulting (formerly Ecosse IP). Each case is self-contained in its own tar.gz archive file. The archive contains the scripts required to perform a full simulati...

Chartrand, C. and Moir, S. Sandia National Laboratories

May 27, 2022
75 Resources
0 Stars
Publicly accessible

TEAMER: Long Island Sound Tidal Resource Assessment Geodatabase Model

This submission includes the Long Island Sound (LIS) Tidal Energy Resource Geodatabase developed collaboratively by Integral Consulting Inc. and Future Island Impact (FII) as part of a TEAMER-supported pre-feasibility study. The geodatabase is provided as a QGIS project and includ...

Flanary, C. and Tanguay, N. Integral Consulting Inc.

Jul 10, 2025
3 Resources
0 Stars
Curated

TEAMER: Crossflow Turbine Fairing Geometry Optimization Report and CFD Modeling Files

The dataset includes computational fluid dynamics (CFD) models and simulation files for crossflow turbines as well as a detailed project report. The report documents the project undertaken by the Ocean Renewable Power Company (ORPC) to design and optimize a modular fairing for the...

McEntee, J. Ocean Renewable Power Company

Aug 08, 2024
3 Resources
0 Stars
Publicly accessible

TEAMER: Supporting model output files for Environmental Compliance Framework for Floating Tidal Turbines, Cook Inlet, AK

Orbital Marine Power (Orbital) is seeking to deploy their floating tidal technology in US waters and has considered the possibility of deploying in temperate waters including the Pacific Northwest (PNW) and the Western Passage, Maine. It has become apparent that some of the most p...

Wang, T. et al Pacific Northwest National Laboratory

Mar 01, 2023
5 Resources
0 Stars
Publicly accessible

TEAMER: Vertical Axis Hydrokinetic Turbine Array Modeling And Optimization Data

This dataset from Emrgy Inc., in collaboration with Sandia National Laboratories, includes integration of modular vertical axis hydrokinetic (HK) turbines into a higher fidelity canal hydraulic model. This submission contains all data collected and used for the Vertical Axis Hydro...

Cuthbert, T. Emrgy, Inc.

Jul 31, 2024
34 Resources
0 Stars
Curated

TEAMER: Numerical Model of IProTech PIP WEC Device

iProTech PIP wave energy converter (WEC) is a slack moored, single hull device with no moving parts in the water, joints or bearings. This submission includes data of the simulation, reports, and code for the iProTech PIP (WEC) project. The organization of the data included in the...

Ogden, D. et al IProTech

Nov 02, 2021
2 Resources
0 Stars
Publicly accessible

TEAMER: Laboratory Evaluation of Dual-Function Oscillating Water Column with Slotted Breakwater O.H. Hinsdale Wave Research Laboratory

This dataset documents a series of controlled laboratory experiments conducted at the O.H. Hinsdale Wave Research Laboratory to evaluate the performance of a dual-function Oscillating Water Column (OWC) system integrated with a slotted breakwater. The experiments aimed to characte...

Walker, M. and Lomonaco, P. University of Hawaii at Manoa

Aug 02, 2025
11 Resources
0 Stars
Curated

1 2 3 Next >>