Search MHK Data

Showing results 1 - 25 of 166.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Technologies
Topics
Signature Projects
Collection Method
Data Type
"LUPA WEC"×
Document×

National Marine Renewable Energy Center Upgrades LUPA

The data provided is part of a power take off damping optimization study. The power take off damping coefficient was swept from 0 to approximately 7000 N/m/s during a single regular wave test with a real time control of the motor/generator. The generated power from the LUPA (Lab U...
Robertson, B. et al Oregon State University
Oct 12, 2022
5 Resources
0 Stars
Publicly accessible

TEAMER: OSU X Hinsdale & Sandia LUPA Uncertainty Testing

This processed data is from TEAMER testing through RFTS 7 at the O.H. Hinsdale Wave Research Laboratory in Corvallis, Oregon. This testing was conducted by Oregon State University (OSU) and Sandia National Laboratories in October and November 2023. The Laboratory Upgrade Point Abs...
Robertson, B. et al Oregon State University
Oct 19, 2023
6 Resources
0 Stars
Curated

TEAMER: OSU X Hinsdale & Sandia LUPA System Identification

This submission is part of a TEAMER testing campaign through RFTS 7 at the O.H. Hinsdale Wave Research Laboratory in Corvallis, Oregon. This testing was conducted by Oregon State University (OSU) and Sandia National Laboratories in October and November 2023. The Laboratory Upgrade...
Robertson, B. et al Oregon State University
Oct 19, 2023
4 Resources
0 Stars
Curated

TEAMER: Experimental Validation and Analysis of Deep Reinforcement Learning Control for Wave Energy Converters

Through this TEAMER project, Michigan Technological University (MTU) collaborated with Oregon State University (OSU) to test the performance of a Deep Reinforcement Learning (DRL) control in the wave tank. Unlike model-based controls, DRL control is model-free and can directly max...
Zou, S. et al Michigan Technological University
Mar 07, 2025
7 Resources
0 Stars
Curated

Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging Years 1 and 2 Software and Data

Software and testing data from the OH Hinsdale Wave lab for DOE-funded project on Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging. This project will perform foundational research and testing to accelerate the sector-wide development a...
Hollinger, G. et al Oregon State University
Oct 26, 2022
14 Resources
0 Stars
Curated

TEAMER: Numerical Model of IProTech PIP WEC Device

iProTech PIP wave energy converter (WEC) is a slack moored, single hull device with no moving parts in the water, joints or bearings. This submission includes data of the simulation, reports, and code for the iProTech PIP (WEC) project. The organization of the data included in the...
Ogden, D. et al IProTech
Nov 02, 2021
3 Resources
0 Stars
Curated

TEAMER: Wavewatts Inc. Preliminary Performance Analysis for the Wavewatts Wave Energy Converter

Renewable energy costs have declined but are still unable to consistently meet power consumption demands when needed most. The Wavewatts concept is able to consistently deliver critical dispatchable renewable energy by directly converting large and slow moving forces of wave energ...
Hon, R. et al Wavewatts Inc.
Sep 04, 2025
3 Resources
0 Stars
Curated

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Sim Model

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...
Tom, N. and Leon, J. AquaHarmonics, Inc.
Dec 31, 2021
6 Resources
0 Stars
Publicly accessible

TEAMER: 1:4 Scale Halona Mooring Design Study Test Data and Processed Data

This report reviews the successful completion of physical model testing of the 100-Watt scale model of the novel oscillating water column type wave energy converter known as Halona. Testing was conducted on 2 different geometries, as well as testing of 2 different mooring configur...
Mercier, R. University of Hawaii at Manoa
Aug 29, 2022
7 Resources
0 Stars
In curation

TEAMER: Advanced Wave-to-Wire OWC model in WEC-Sim

Accurate numerical models are crucial for the development of wave energy converter (WEC) technologies, providing the means for power production and lifetime assessment, site selection, and design of mooring lines, PTO systems and controllers, among other aspects. This project aims...
Peñalba, M. et al Mondragon Goi Eskola Politeknikoa
Dec 20, 2024
6 Resources
0 Stars
Curated

TEAMER: Public Post Access Report Wavewatts Inc. Preliminary Performance Analysis for the Wavewatts Wave Energy Converter

Renewable energy costs have declined but are still unable to consistently meet power consumption demands when needed most. The Wavewatts concept is able to consistently deliver critical dispatchable renewable energy by directly converting large and slow moving forces of wave energ...
Hon, R. et al Wavewatts Inc.
Jan 05, 2026
2 Resources
0 Stars
Curated

TEAMER: Wave Energy Converter SIMulator (WEC-SIM) Support for an Adaptive Wave Energy Converter by Ocean Motion Technologies

Scripts from project git repo + tutorial slide deck generated for the TEAMER RFTS 1 (request for technical support) collaborative project between Ocean Motion Technologies, Inc. and Sandia National Laboratories + National Renewable Energy Laboratory. The project simulates an adapt...
Keester, A. et al Ocean Motion Technologies, Inc.
Jan 29, 2021
4 Resources
0 Stars
Curated

TEAMER: Additional Degree of Freedom for WEC Model

'Additional Degree of Freedom for WEC' WEC-Sim numerical model from RFTS 1 (request for technical support) TEAMER project. An increase in wave energy converter (WEC) efficiency requires not only consideration of the nonlinear effects in the WEC dynamics and the power take-off (PTO...
McCall, A. et al Dehlsen Associates, LLC
May 26, 2022
3 Resources
0 Stars
Curated

TEAMER: Modeling, Optimization, and Design Data for a Bio-Inspired Wave Energy Converter

This dataset contains modeling files, computational results, and analysis reports from work focused on the initial optimization and design of a bio-inspired Wave Energy Converter (WEC). Data were produced using tools including WEC-Sim and WecOptTool, with supporting scripts and mo...
Grasberger, J. et al Sandia National Laboratories
Jul 14, 2025
2 Resources
0 Stars
Curated

Advanced WEC Dynamics and Controls, Test 1

Numerous studies have shown that advanced control of a wave energy converter's (WEC's) power take off (PTO) can provide significant increases (on the order of 200-300%) in WEC energy absorption. Transitioning these control approaches from simplified paper studies to application in...
Coe, R. Sandia National Laboratories
Feb 26, 2016
3 Resources
0 Stars
Publicly accessible

TEAMER: Numerical Modeling and Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC)

This project focused on developing an automated workflow to evaluate and optimize the iProTech Pitching Inertial Pump (PIP) wave energy converter (WEC) using open-source Python packages and the MATLAB/Simulink tool, WEC-Sim. The process involved parameterizing key design variables...
Wynn, N. et al National Renewable Energy Laboratory
Apr 11, 2024
2 Resources
0 Stars
Curated

State Estimation for advanced control of wave energy converters

A report on state estimation for advanced control of wave energy converters (WECs), with supporting data models and slides from the overview presentation. The methods discussed are intended for use to enable real-time closed loop control of WECs.
Coe, R. and Bacelli, G. Sandia National Laboratories
Apr 25, 2017
6 Resources
0 Stars
Publicly accessible

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Test Logs and Results

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...
Hagmuller, A. et al AquaHarmonics, Inc.
Dec 16, 2021
10 Resources
0 Stars
Curated

WEC Controls Optimization Final Report

The over-arching project objective is to fully develop and validate optimal controls frameworks that can subsequently be applied widely to different WEC devices and concepts. Optimal controls of WEC devices represent a fundamental building block for WEC designers that must be cons...
Previsic, M. and Karthikeyan, A. Re Vision Consulting
Aug 26, 2020
1 Resources
0 Stars
Publicly accessible

TEAMER: Modeling of Wave Energy Converter-augmented Ocergy Offshore Platform Immediate Release Report

In this project, using the MATLAB/Simulink tool, WEC-Sim, initial simulations were performed of Ocergy's offshore data platform, the OCG-Data, to study the feasibility of augmenting this platform with several wave energy converters (WECs) affixed to platform structure. A target of...
Tom, N. et al Ocergy, Inc
Mar 03, 2026
2 Resources
0 Stars
Curated

Techno-Economic Analysis of AquaHarmonics Wave Energy Converter Using SAM: Baseline and Optimized LCOE Estimates

This dataset presents techno-economic modeling results for the AquaHarmonics Wave Energy Converter (WEC), analyzing both baseline and optimized system configurations using the National Renewable Energy Laboratory's System Advisor Model (SAM). The models incorporate empirical perfo...
Hagmüller, A. et al AquaHarmonics, Inc.
Jun 24, 2025
5 Resources
0 Stars
Curated

HERO WEC 2024 Electrical Configuration Deployment Data

The following submission includes raw and processed electrical configuration deployment data from the in water deployment of NREL's Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC), in the form of parquet files, TDMS files, CSV files, bag files, and MATLAB w...
Jenne, S. et al National Renewable Energy Laboratory
Apr 18, 2024
16 Resources
0 Stars
Publicly accessible

TEAMER: Maximal Asymmetric Drag Wave Energy Converter

Boundary element method (BEM) and WEC-Sim analysis of UMass Dartmouth's maximal asymmetric drag wave energy converter (MADWEC), including its tethered ballast system and PTO (power take-off). This project is part of the TEAMER RFTS 6 (request for technical support) program.
MacDonald, D. et al University of Massachusetts Dartmouth
Aug 18, 2023
3 Resources
0 Stars
Curated

Centipod WEC Design for PacWave, Performance and Load Calculations

This submission compiles the 2024 Centipod wave energy converter (WEC) design results for PacWave South. It includes a Significant Wave Height-Energy Period (Hs-Te) power matrix for the designed device, array-level performance estimates, and System Advisor Model (SAM) reports with...
McCall, A. Dehlsen Associates, LLC
Dec 05, 2025
3 Resources
0 Stars
Curated

SeaRAY WEC Preliminary Design and Test Planning

The SeaRAY is a deployable power system for maritime sensors, monitoring equipment, communications, unmanned underwater vehicles, and other similar payloads. This project is to design, deliver, and test a prototype low-power WEC that lowers the total cost of ownership and provides...
Hammagren, E. et al Columbia Power Technologies, Inc.
May 18, 2020
4 Resources
0 Stars
Awaiting release
12345Next >>