Search MHK Data

TEAMER: Tidal Turbine Test, Downeast Turbines, July 12, 2021

Downeast Turbines tested a tidal turbine prototype with novel rotor/channel system and lateral effluent discharge apparatus (LEDA), during five days of testing in the flume at Alden Lab. Three days of testing (July 12-14, 2021) focused on turbine power metrics of torque and rpm, w...

McBride, G. Downeast Turbines

Mar 26, 2022
6 Resources
0 Stars
Publicly accessible

TEAMER: Electrically Engaged Undulation System for Unmanned Underwater Vehicles

This TEAMER RFTS 1 (Request for Technical Support) project supported the flume tank testing of a long range, high endurance unmanned underwater vehicle (UUV) to monitor maritime space. Today, battery-powered remotely operated vehicles (ROVs) lack the duration to make persistent, w...

Lu, K. and Datla, R. Pyro-E

Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

Tidal Current Cross-flow Turbine Wake ADV and PIV Data

Measurements in the wake of a high-solidity cross-flow turbine in a laboratory flume obtained using Acoustic Doppler Velocimetry and Particle Image Velocimetry for the purposes of characterizing the turbine wake and comparing the methods.

Polagye, B. University of Washington

Dec 06, 2016
6 Resources
1 Stars
Publicly accessible

TEAMER: Experimental performance characterization of a shrouded axial-flow turbine

Sitkana has developed a shrouded hydrokinetic turbine with a modular, low-cost design that can be scaled to meet the needs of remote communities. With technical support from the University of Washington, Sitkana sought to experimentally characterize the mechanical power and struct...

McMullan, L. et al University of Washington

Oct 20, 2023
2 Resources
0 Stars
Publicly accessible

RANS Simulation VBM of Array of Three Coaxial Lab Scaled DOE RM1 MHK Turbine with 5D Spacing

Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for the Reynolds Averaged Navier-Stokes (RANS) simulation of three coaxially located lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CF...

Javaherchi, T. University of Washington

Jun 08, 2016
9 Resources
0 Stars
Publicly accessible

Experimental Testing of a Floating Oscillating Surge Wave Energy Converter at Hinsdale Wave Research Laboratory

In order to generate a public data set that can be used to validate Wave Energy Converter (WEC) numerical codes, such as WEC-Sim, Sandia National Laboratories led an experimental testing campaign of a 1:33 scale Floating Oscillating Surge Wave Energy Converter (FOSWEC) in the Dire...

Ruehl, K. et al Sandia National Laboratories

Jun 15, 2016
3 Resources
0 Stars
Curated

CalWave Tank Testing Lir Deep Ocean Basin

Experimental tank testing report for CalWave's 1:20 & 1:30 scale prototype testing at the Lir National Ocean Test Facility in Ireland. Testing was completed in January 2018. Test report includes description of the scaled prototype, primary testing objectives, instrumentation and b...

Boerner, T. CalWave Power Technologies Inc.

Jan 15, 2018
1 Resources
0 Stars
Publicly accessible

Accelerated Lifetime Testing of Main Shaft Seals for Tidal Turbine Rotors

The lifetime assessment experimental platform described in this report is specifically designed for testing the low-speed main shaft seal for Verdant Power's (Verdant Power Inc., New York, New York) fifth-generation (Gen5) underwater power generation turbine. This project is joint...

Murray, R. et al National Renewable Energy Laboratory

Jul 01, 2024
1 Resources
0 Stars
Curated

MARMOK-Oscillating Water Column: WEC Tank Testing Campaign Data (November 2022)

The main objective of this project is advancing towards the commercial viability of IDOM's floating Oscillating Water Column (OWC) technology by performing a detailed WEC design to fit PacWave-South site conditions. This includes tank testing campaign data conducted by IDOM at TEX...

De Miguel, B. and Maeso, A. IDOM Incorporated

Nov 17, 2022
3 Resources
0 Stars
Awaiting release

Advanced TidGen Power System Preliminary IO&M and Testing Plan

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
1 Resources
0 Stars
Publicly accessible

Wave Tank Testing Report for Controls Validation of a Heaving Point Absorber

The core objectives of this project is to improve the power capture of three different wave energy conversion (WEC) devices by more than 50% using an advanced control system and validate the attained improvements using wave tank and full scale testing. In parallel, we will bring a...

Previsic, M. et al Re Vision Consulting

Aug 26, 2020
3 Resources
0 Stars
Publicly accessible

Wave Tank Testing of 1-DoF Heaving Buoy for Controls Validation Purposes

This submission includes the wave tank testing data used to validate the controls optimization efforts of a heaving 1-DoF buoy.

Previsic, M. et al Re Vision Consulting

Jul 13, 2017
4 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Material Characterization Program

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
2 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Composites Structural Testing

Seawater aging response was investigated in marine-grade glass/epoxy, glass/vinyl ester, carbon/epoxy and carbon/vinyl ester composites with respect to water uptake, interlaminar shear strength, flexural strength, tensile strength, and tensile fracture surface observations. The re...

Krumpe, A. ORPC Inc.

Jan 06, 2020
2 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC 1:50 Small Scale Tank Testing Plan

Detailed laboratory test plan for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX." Includes test points, materials and methods, and sensors/telemetry to be used. Includes schematics of test apparatus and sensor type and locations.

Delos-Reyes, M. and Morrow, M. M3 Wave

Feb 17, 2017
1 Resources
0 Stars
Publicly accessible

CalWave Open Water Demonstration PTO Belt Assessment & Test Report Public

PTO (Power Take-Off) belt test and analysis report conducted under CalWave's Open Water Demonstration Award EE0008097 Belt Tradeoffs for Winch PTO. The report tests two types of belts: a high modulus polyethylene (HMPE) woven fiber belt and a steel cable polyurethane belt. The goa...

Kojimoto, N. and Boerner, T. CalWave Power Technologies Inc.

May 28, 2021
1 Resources
0 Stars
Publicly accessible

Timeseries Data from the Experimental Testing of the OPI's Prototype Hydraulic Drivetrain.

Timeseries data from the experimental testing of the OPI's prototype hydraulic drivetrain. The data is provided in .mat file format. The units for the data can be found in the ReadMe included in the submission resources.

Mundon, T. Oscilla Power, Inc.

Nov 26, 2021
4 Resources
0 Stars
Awaiting release

TEAMER: CalWave xWave New Technology Qualification and Path to Certification Final Report

CalWave is developing a wave energy converter (WEC) called xWave, which operates fully submerged and is classified as a submerged pressure differential type. As ocean waves pass over the submerged wave buoy, a pressure differential is created, exciting the absorber in multiple deg...

Petcovic, D. and Zhang, S. CalWave Power Technologies Inc.

Oct 31, 2022
2 Resources
0 Stars
Curated

Single Turbine Test Procedure and Data Acquisition Plan

This document describes the test procedure and the data acquisition plan for the Single Turbine Subsystem (STS) testing that is part of the Advanced TidGen Power System. The goal of the Advanced TidGen Power System is to demonstrate a commercially viable tidal power system, integr...

Hayes, N. ORPC Inc.

Apr 13, 2022
1 Resources
0 Stars
Awaiting release

TEAMER: ORPC Pitching Foil Crossflow Turbine Efficiency Testing Report

Turbine performance data, collected and processed by the University of New Hampshire (UNH). This presentation includes turbine performance vs tow speed and Reynolds #, turbine performance vs tip-speed ratio, as well as the TARE values used for processing the data. Project was fun...

Pillsbury, L. Ocean Renewable Power Company

Sep 01, 2022
1 Resources
0 Stars
Curated

MOIS Installation on NWEI Azura Half Scale WEC WETS Testing Documentation

This submission includes documentation on the Modular Ocean Instrumentation System (MOIS) installation on the Azura 1/2 scale wave energy converter at the Marine Station Kaneohe Bay (MCBH). Data from the deployment will be uploaded over the course of the test. The instrumentatio...

Nelson, E. National Renewable Energy Laboratory

May 30, 2015
7 Resources
0 Stars
Publicly accessible

Single Turbine Test Procedure and Data Acquisition Plan, Rev. B

The TidGen80 Single Turbine System (TD80-STS or STS) will be used to test the power production performance of a single turbine in a tidal environment. Installation of the STS will also test the deployment system and methods for the full scale TD80. This document describes the te...

Hayes, N. ORPC Inc.

Apr 13, 2022
1 Resources
0 Stars
Awaiting release

M3 Wave DMP/APEX WEC Final Technical Report

This project successfully developed methods for numerical modeling of sediment transport phenomena around rigid objects resting on or near the ocean floor. These techniques were validated with physical testing using actual sediment in a large wave tank. These methods can be applie...

Morrow, M. et al M3 Wave

May 31, 2018
1 Resources
0 Stars
Publicly accessible

CalWave Device Behavior in Different Sea States from Scaled Tank Testing

This submission contains a summary of tank test derived WEC device behavior in different irregular sea states. CalWave sought to conduct experimental tank testing of scaled prototype units early on in the design process to obtain a first estimation of device performance for sea ...

Boerner, T. and Murray, B. CalWave Power Technologies Inc.

Mar 30, 2018
1 Resources
0 Stars
Publicly accessible

TidGen MHK Generator Composite Fatigue Analysis Procedure

A procedure was described for performing a fatigue analysis of composite foils for an MHK generator. The steps included generating load data, S-N (Stress versus Number of cycles to failure) diagrams through fatigue testing, cycle counts, damage versus load, and cumulative damage. ...