Search MHK Data

Virtual Flow Solver Geophysics: A 3D Incompressible Navier-Stokes Solver

Virtual Flow Solver Geophysics (VFS-Geophysics) is a three-dimensional (3D) incompressible Navier-Stokes solver based on the Curvilinear Immersed Boundary (CURVIB) method. The CURVIB is a sharp interface type of immersed boundary (IB) method that enables the simulation of fluid f...

Khosronejad, A. et al Stony Brook University

Jul 17, 2023
2 Resources
0 Stars
Publicly accessible

TEAMER: Technical Support for Aquantis (Materials): CRD-21-17762-0

The Aquantis Tidal Power Tug is a unique synthesis of best-available technologies and materials configured as a novel spar vessel to create an optimal platform for tidal stream energy conversion. The Power Tug utilizes an upstream-facing horizontal, 2-bladed rotor. To drive down c...

Swales, H. et al Aquantis, Inc.

Oct 17, 2024
1 Resources
0 Stars
In curation

TigerRAY Drifting Tests and Wave Data Lake Washington and Puget Sound, February 2023

This dataset contains measurements from drifting deployments of the TigerRAY, a two-body wave energy converter, and four SWIFT buoys on Lake Washington and Puget Sound during February 2023. Tests were conducted under varying wave conditions, including natural waves, calm condition...

Rusch, C. et al University of Washington Applied Physics Lab

Apr 30, 2025
5 Resources
0 Stars
Curated

TEAMER: MarineSitu mini-AMP Array Data from a Four Month Deployment at PNNL-Sequim

From 07/01/2024 until 10/28/2024 Pacific Northwest National Lab (PNNL) supported the first long-term deployment and demonstration of MarineSitu?s mini-Adaptable Monitoring Package (mini-AMP). The mini-AMP was deployed off the the pier at PNNL-Sequim and located at approximately (4...

Nowak, T. Pacific Northwest National Laboratory

Jul 01, 2024
0 Resources
0 Stars
In progress

NWEI Azura RTI 1/20th Model Validation Wave Tank Test Data

Data from the 1/20th wave tank test of the RTI model. Northwest Energy Innovations (NWEI) has licensed intellectual property from RTI, and modified the PTO and retested the 1/20th RTI model that was tested as part of the Wave Energy Prize. The goal of the test was to validate NWEI...

Ling, B. and Lettenmaier, T. Northwest Energy Innovations

May 08, 2017
7 Resources
0 Stars
Publicly accessible

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Sim Model

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
6 Resources
0 Stars
Publicly accessible

TEAMER: Pitching Foil Crossflow Turbine Efficiency Data

This dataset documents the efficiency testing of a pitching foil crossflow turbine, conducted at the University of New Hampshire's (UNH) Chase Ocean Engineering Laboratory tow tank facility. The tests explored various pitch phases and amplitudes, ranging from 0 to 18 degrees, acro...

McEntee, J. Ocean Renewable Power Company

Aug 07, 2024
2 Resources
0 Stars
Awaiting release

Northwest National Marine Renewable Energy Center, OR Project Plans

Plans for Northwest National Marine Renewable Energy Center (NNMREC) Project. Mobile Ocean Test Berth (MOTB) plans PMEC-SETS Plans

Hellin, D. Northwest National Marine Renewable Energy Center

Jun 29, 2016
20 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Preliminary IO&M and Testing Plan

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
1 Resources
0 Stars
Publicly accessible

RANS Simulation VBM of Single Full Scale DOE RM1 MHK Turbine

Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for Reynolds Averaged Navier-Stokes (RANS) simulation of a single full scale DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. In this...

Javaherchi, T. and Aliseda, A. University of Washington

Apr 10, 2013
8 Resources
0 Stars
Publicly accessible

TEAMER: OSU X Hinsdale & Sandia LUPA Uncertainty Testing

This processed data is from TEAMER testing through RFTS 7 at the O.H. Hinsdale Wave Research Laboratory in Corvallis, Oregon. This testing was conducted by Oregon State University (OSU) and Sandia National Laboratories in October and November 2023. The Laboratory Upgrade Point Abs...

Robertson, B. et al Oregon State University

Oct 19, 2023
6 Resources
0 Stars
Curated

StingRAY Updated WEC Risk Registers

Updated Risk Registers for major subsystems of the StingRAY WEC completed according to the methodology described in compliance with the DOE Risk Management Framework developed by NREL.

Rhinefrank, K. and Ondusko, M. Columbia Power Technologies, Inc.

Jun 27, 2018
17 Resources
0 Stars
Publicly accessible

Ocean Thermal Energy Conversion (OTEC) Datasets

The data presented here were collected from the Ocean Thermal Extractable Energy Visualization (OTEEV) project. The OTEEV project focused on assessing the Maximum Practicably Extractable Energy (MPEE) from the world's ocean thermal resources. This project explored the feasibili...

Langle, N. et al National Renewable Energy Laboratory

Nov 25, 2014
10 Resources
0 Stars
Curated

SeaRAY WEC Preliminary Design and Test Planning

The SeaRAY is a deployable power system for maritime sensors, monitoring equipment, communications, unmanned underwater vehicles, and other similar payloads. This project is to design, deliver, and test a prototype low-power WEC that lowers the total cost of ownership and provides...

Hammagren, E. et al Columbia Power Technologies, Inc.

May 18, 2020
4 Resources
0 Stars
Awaiting release

WEC Controls Optimization Final Report

The over-arching project objective is to fully develop and validate optimal controls frameworks that can subsequently be applied widely to different WEC devices and concepts. Optimal controls of WEC devices represent a fundamental building block for WEC designers that must be cons...

Previsic, M. and Karthikeyan, A. Re Vision Consulting

Aug 26, 2020
1 Resources
0 Stars
Publicly accessible

TEAMER: Additional Degree of Freedom for WEC Model

'Additional Degree of Freedom for WEC' WEC-Sim numerical model from RFTS 1 (request for technical support) TEAMER project. An increase in wave energy converter (WEC) efficiency requires not only consideration of the nonlinear effects in the WEC dynamics and the power take-off (PTO...

McCall, A. et al Dehlsen Associates, LLC

May 26, 2022
2 Resources
0 Stars
Awaiting release

H3 StingRAY Final Design and Technical Report

The goal of this Project was to develop a standards-compliant, fabrication-ready design of Columbia Power Technologies' (C-Power) next-generation wave energy converter (WEC), the StingRAY H3. The H3 is a design iteration of C-Power's StingRAY WEC and is intended for electrical pow...

Prudell, J. and Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Sep 15, 2023
2 Resources
0 Stars
Publicly accessible

SeaRAY Open-Water Test Sensor MODAQ Data II

This dataset contains raw sensor data collected during open-water testing of the SeaRAY wave energy converter system. Data was recorded using the MODAQ (Modular Ocean Data Acquisition) system and is provided in National Instruments TDMS format. A companion spreadsheet lists the se...

Zhang, Z. Columbia Power Technologies, Inc.

May 07, 2025
3 Resources
0 Stars
Curated

Hawaii Wave Surge Energy Converter (HAWSEC) OSU O.H. Hinsdale Basin

The following information and metadata applies to both the Phase I (Hydrodynamics) and Phase II (Full System Power Take-Off) zip folders which contain testing data from the OSU (Oregon State University) O.H. Hinsdale Wave Research Laboratory, from both OSU and the University of Ha...

Rajagopalan, K. et al University of Hawaii at Manoa

Jun 22, 2022
3 Resources
0 Stars
Awaiting release

RANS Simulation VBM of Single Lab Scaled DOE RM1 MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. The lab-scaled DOE RM1 is a re-design geometry, based of the full scale DOE RM1 design, producing same po...

Javaherchi, T. et al University of Washington (NNMREC)

Apr 15, 2014
8 Resources
0 Stars
Publicly accessible

TEAMER: Tidal Energy Resource Characterization and Model Validation via the Assessment of Distributed Current Measurements from microFloat Swarms, Data and Post-Access Report

This project evaluated how high-resolution, spatially distributed field data can be used to refine and validate site-scale hydrodynamic simulations of tidal channels. Use of such spatially-distributed field observations or site-scale hydrodynamic simulations will be needed for pro...

University of Washington (NNMREC)

Aug 20, 2020
0 Resources
0 Stars
Curated

2023 Risk Management Plan and Register for Low-Power WEC for Non-Grid Applications

This is an updated risk management plan and risk register for the design, build and test of a novel, remote, low-power wave energy converter (WEC) for non-grid applications. This Columbia Power Technologies project seeks to develop a prototype low-power WEC that lowers the total c...

Hammagren, E. et al Columbia Power Technologies, Inc.

Jun 14, 2023
17 Resources
0 Stars
Awaiting release

StingRAY Failure Mode, Effects and Criticality Analysis: WEC Risk Registers

Analysis method to systematically identify all potential failure modes and their effects on the Stingray WEC system. This analysis is incorporated early in the development cycle such that the mitigation of the identified failure modes can be achieved cost effectively and efficient...

Rhinefrank, K. Columbia Power Technologies, Inc.

Jul 25, 2016
18 Resources
0 Stars
Publicly accessible

RANS Simulation VBM of Array of Three Coaxial Lab Scaled DOE RM1 MHK Turbine with 5D Spacing

Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for the Reynolds Averaged Navier-Stokes (RANS) simulation of three coaxially located lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CF...

Javaherchi, T. University of Washington

Jun 08, 2016
9 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Deployment and Mooring System