Search MHK Data

StingRAY WEC Risk Register

Risk Registers for major subsystems of the StingRAY WEC completed in compliance with the DOE Risk Management Framework developed by NREL.

Rhinefrank, K. Columbia Power Technologies, Inc.

Feb 24, 2017
18 Resources
0 Stars
Publicly accessible

TEAMER AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Test Logs and Results

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Hagmuller, A. et al AquaHarmonics, Inc.

Dec 16, 2021
9 Resources
0 Stars
Publicly accessible

Experimental Study of a Dual Function Oscillating Water Column with Slotted Barrier for Shore Protection and Wave Energy Extraction

Ten sharp-edged orifice plates were mounted onto ten pneumatic Oscillating Water Column (OWC) chambers integrated into a breakwater array installed in the wave basin. The OWC chambers were attached to a slotted barrier, where two porosities were tested, 10% and 25%. Experiments we...

Huang, Z. UH Manoa

Jul 07, 2025
1 Resources
0 Stars
Awaiting curation

Linear and Nonlinear Spectra for Time Series Measured in the North Sea

This submission includes both linear and nonlinear wave spectra for time series taken off the Ekofisk Oil Platform in the North Sea for the years 2003-2020. The raw data was sourced from the Norwegian Meteorological Institute (https://www.met.no/en) and processed in Matlab. This...

Sutherland, A. Pacific Marine Energy Center (PMEC)

Jan 28, 2025
3 Resources
0 Stars
Curated

Tanana River Transects September 2010

As part of the initial site investigation for the Tanana River near Nenana, Alaska, a set of transects was completed on September 23rd, 2010. Similar to the one done on August 10th, 2010. This data was collected with a Rio Grande 1200 Teledyne ADCP the same year the initial bathym...

DUVOY, P. University of Alaska Fairbanks

Sep 23, 2010
2 Resources
0 Stars
Publicly accessible

RM3 Wave Tank Validation Model

An approximately 1/75th scale point absorber wave energy absorber was built to validate the testing systems of a 16k gallon single paddle wave tank. The model was build based on the RM3 design and incorporated a linear position sensor, a force transducer, and wetness detection sen...

Candon, C. and Fao, R. National Renewable Energy Laboratory

Jul 31, 2023
3 Resources
0 Stars
Publicly accessible

Admiralty Inlet, WA Tidal Current Turbulence

Tripod and mooring data using acoustic doppler velocimeter (ADV) and acoustic doppler current profiler (ADCP) of tidal turbulence. When using the data, please cite the J. Oceanic Eng. paper included in this submission, and please contact Jim Thomson prior to submitting publication...

Thomson, J. Northwest National Marine Renewable Energy Center

Feb 01, 2011
2 Resources
0 Stars
Publicly accessible

Bench Testing Data and Report for an Early Prototype Pitch Resonator WEC

This dataset encompasses data and documentation from bench tests conducted on an early prototype of a "pitch resonator" wave energy converter (WEC). The testing aimed to validate numerical models and reduce risks associated with the pitch resonator concept, which is designed to co...

Coe, R. et al Sandia National Laboratories

Aug 09, 2024
4 Resources
0 Stars
Publicly accessible

NREL MOIS Data for NWEI Azura May 2016

NREL Modular Ocean Instrumentation System (MOIS) data files for the Azura grid-connected deployment at the 30-meter berth of the US Navy's Wave Energy Test Site (WETS 30m Site) at the Kaneohe Marine Corps Base Hawaii (MCBH) on the windward (northeast) coast of the island of Oahu, ...

Nelson, E. National Renewable Energy Laboratory

Jun 07, 2016
4 Resources
0 Stars
Publicly accessible

TEAMER: Electrically Engaged Undulation System for Unmanned Underwater Vehicles

This TEAMER RFTS 1 (Request for Technical Support) project supported the flume tank testing of a long range, high endurance unmanned underwater vehicle (UUV) to monitor maritime space. Today, battery-powered remotely operated vehicles (ROVs) lack the duration to make persistent, w...

Lu, K. and Datla, R. Pyro-E

Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

HERO WEC V1.0 2024 WEC-Sim Detailed Simulation Runs and Summary Data

This dataset includes results from simulations of NREL's hydraulic and electric reverse osmosis wave energy converter (HEREO WEC). Simulation runs include 135 wave cases that were based on the updated WEC-Sim model, which is linked below. The data represented in this repository i...

Panzarella, J. et al National Renewable Energy Laboratory

Jul 01, 2024
6 Resources
0 Stars
Publicly accessible

TEAMER: Techno-Economic Assessment of the Crestwing WEC Device

This dataset contains a report and an Excel file documenting a techno-economic model developed to assess the Crestwing wave energy converter (WEC), an attenuator-type device composed of two hinged rectangular barges. Funded by TEAMER and carried out by Re Vision Consulting, the st...

Previsic, M. Re Vision Consulting

Mar 14, 2025
3 Resources
0 Stars
Curated

Modeling the Integration of Marine Energy into Microgrids Wave Resource Assessment

This submission has wave resource assessments which were conducted for six locations based on IEC requirements using the DOE WPTO Hindcast data and MHKiT. The locations are chosen to provide varying wave climates and include PacWave South, OR; Wave Energy Testing Site (WETS), HI; ...

Mankle, H. and Robertson, B. University of Alaska Fairbanks

Jan 19, 2023
9 Resources
0 Stars
Publicly accessible

HERO WEC V1.0 WEC-Sim Detailed Simulation Runs and Summary Data

Data sets from simulation runs include 144 wave cases that were run based on the WEC-Sim model (https://mhkdr.openei.org/submissions/483). The 144 wave cases represent waves with the following wave height and wave period ranges: Significant Wave Height: 0.25 4.0m in 0.25m incre...

Jenne, S. National Renewable Energy Laboratory

Aug 12, 2022
9 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC Wave Tank Testing Final Raw Dataset

Complete dataset from wave tank testing for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX". Subdirectories include Readme files where appropriate to aid in navigation.

Morrow, M. et al M3 Wave

Sep 01, 2017
2 Resources
0 Stars
Publicly accessible

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Sim Model

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
6 Resources
0 Stars
Publicly accessible

MASK4 Test Campaign for Sandia WaveBot Device Dataset

This data and report details the findings from a wave tank test focused on production of useful work of a wave energy converter (WEC) device. The experimental system and test were specifically designed to validate models for power transmission throughout the WEC system. Additional...

Forbush, D. et al Sandia National Laboratories

Dec 25, 2023
5 Resources
0 Stars
Publicly accessible

Fish Detection AI, Optic and Sonar-trained Object Detection Models

The Fish Detection AI project aims to improve the efficiency of fish monitoring around marine energy facilities to comply with regulatory requirements. Despite advancements in computer vision, there is limited focus on sonar images, identifying small fish with unlabeled data, and ...

Slater, K. et al Water Power Technology Office

Jun 25, 2014
12 Resources
0 Stars
Curated

CODAS Data from Oliktok Point, Beaufort Sea, Alaska

Cryosphere/Ocean Distributed Acoustic Sensing (CODAS) data collected from the Beaufort Sea, Alaska, using ~37.4 km of dark telecommunications fiber located at Oliktok Point, Alaska. Data were collected with a Silixa iDAS, using 10 m gauge length, 2 m spatial resolution, and 1000 H...

Baker, M. and Abbott, R. Sandia National Laboratories

Aug 08, 2023
23 Resources
0 Stars
Publicly accessible

Centipod WEC, Advanced Controls, Baseline LCOE

Project baseline levelized cost of energy (LCOE) model for the Centipod WEC containing annual energy production (AEP) data, a cost breakdown structure (CBS), model documentation, and the LCOE content model. This baseline was built for comparison with the resultant LCOE model, buil...

McCall, A. Dehlsen Associates, LLC

Feb 15, 2016
7 Resources
0 Stars
Publicly accessible

Centipod WEC, Advanced Controls, Resultant LCOE

Project resultant levelized cost of energy (LCOE) model after implementation of model predictive control (MPC) controller. Contains annual energy production (AEP) data, cost breakdown structure (CBS), model documentation, and the LCOE content model. This is meant for comparison wi...

McCall, A. Dehlsen Associates, LLC

Feb 15, 2016
7 Resources
0 Stars
Publicly accessible

HERO WEC Bills of Materials: WEC, RO System, and Submersible Pump

This submission includes detailed Bills of Materials for the NREL-designed and built Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC), as well as the reverse osmosis assembly and submersible pump that are used in the HERO WEC. The WEC file is specific to th...

Jenne, S. and Panzarella, J. National Renewable Energy Laboratory

Jan 01, 2024
5 Resources
0 Stars
Publicly accessible

Version 2 Tidal Energy Resource Characterization, Velocity and Turbulence Measurements, Cook Inlet, AK, 2021

Version 2 of MHKDR submission #475, which also contains the metadata for these measurements. Files here are stored in netCDF4 format, which can be read in Python using the "netcdf4" or "xarray" packages or in MATLAB using the "ncread()" function. Changes are as follows: MWM1 (mi...

Kilcher, L. and McVey, J. Pacific Northwest National Laboratory

Jul 01, 2021
9 Resources
1 Stars
Publicly accessible

Techno-Economic Analysis of AquaHarmonics Wave Energy Converter Using SAM: Baseline and Optimized LCOE Estimates

This dataset presents techno-economic modeling results for the AquaHarmonics Wave Energy Converter (WEC), analyzing both baseline and optimized system configurations using the National Renewable Energy Laboratory's System Advisor Model (SAM). The models incorporate empirical perfo...

Hagmüller, A. et al AquaHarmonics, Inc.

Jun 24, 2025
4 Resources
0 Stars
Curated

TEAMER: Laboratory Upgrade Point Absorber v2 CAD Model and Bill of Materials

The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD) files are provided here in two forms: the original SOLIDWORKS (2024) model as "LUPA SOLIDWORKS.zip" and as a STEP fi...

Robertson, B. et al Oregon State University

Apr 22, 2025
9 Resources
0 Stars
Curated

<< Previous 1 2 3 4 5 Next >>