Search MHK Data

StingRAY Failure Mode, Effects and Criticality Analysis: WEC Risk Registers

Analysis method to systematically identify all potential failure modes and their effects on the Stingray WEC system. This analysis is incorporated early in the development cycle such that the mitigation of the identified failure modes can be achieved cost effectively and efficient...

Rhinefrank, K. Columbia Power Technologies, Inc.

Jul 25, 2016
18 Resources
0 Stars
Publicly accessible

TidGen MHK Generator Composite Fatigue Analysis Procedure

A procedure was described for performing a fatigue analysis of composite foils for an MHK generator. The steps included generating load data, S-N (Stress versus Number of cycles to failure) diagrams through fatigue testing, cycle counts, damage versus load, and cumulative damage. ...

Krumpe, A. ORPC Inc.

Apr 14, 2020
2 Resources
0 Stars
Publicly accessible

CalWave Open Water Demo FMEA Update Budget Period 2

The Failure Modes and Effects Analysis (FMEA) is a qualitative reliability technique for systematically analyzing each possible failure mode within a hardware system, and identifying the resulting effect on that system, the mission, and the personnel. This submission includes an u...

Boerner, T. et al CalWave Power Technologies Inc.

Oct 09, 2020
1 Resources
0 Stars
Awaiting release

Advanced TidGen Power System Deployment and Mooring System

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
2 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Composites Structural Testing

Seawater aging response was investigated in marine-grade glass/epoxy, glass/vinyl ester, carbon/epoxy and carbon/vinyl ester composites with respect to water uptake, interlaminar shear strength, flexural strength, tensile strength, and tensile fracture surface observations. The re...

Krumpe, A. ORPC Inc.

Jan 06, 2020
2 Resources
0 Stars
Publicly accessible

2023 Risk Management Plan and Register for Low-Power WEC for Non-Grid Applications

This is an updated risk management plan and risk register for the design, build and test of a novel, remote, low-power wave energy converter (WEC) for non-grid applications. This Columbia Power Technologies project seeks to develop a prototype low-power WEC that lowers the total c...

Hammagren, E. et al Columbia Power Technologies, Inc.

Jun 14, 2023
17 Resources
0 Stars
Awaiting release

CalWave Reports and Plans for xWave Device Demonstration at PacWave South Site

CalWave has developed a submerged pressure differential type Wave Energy Converter (WEC) architecture called xWave. The single body device oscillates submerged, is positively buoyant, and taut moored to the sea floor and integrates novel features such as absorber submergence depth...

Boerner, T. et al CalWave Power Technologies Inc.

Feb 29, 2024
6 Resources
0 Stars
Awaiting release

PacWave South SeaRAY k2 Risk Registers

The SeaRAY is a deployable power system for maritime sensors, monitoring equipment, communications, unmanned underwater vehicles, and other similar payloads. This project is to design, deliver, and test a prototype low-power WEC that lowers the total cost of ownership and provides...

Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Sep 29, 2023
12 Resources
0 Stars
Awaiting release

Advanced TidGen Power System Material Characterization Program

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
2 Resources
0 Stars
Publicly accessible

Aquantis 2.5 MW Ocean Current Generation Device Scaled Tank Test Design and Results

Aquantis 2.5 MW Ocean Current Generation Device, Tow Tank Dynamic Rig Structural Analysis Results. This is the detailed documentation for scaled device testing in a tow tank, including models, drawings, presentations, cost of energy analysis, and structural analysis. This datase...

Swales, H. et al Dehlsen Associates, LLC

Jun 03, 2015
46 Resources
0 Stars
Publicly accessible

TEAMER: Advanced Wave-to-Wire OWC model in WEC-Sim

Accurate numerical models are crucial for the development of wave energy converter (WEC) technologies, providing the means for power production and lifetime assessment, site selection, and design of mooring lines, PTO systems and controllers, among other aspects. This project aims...

Peñalba, M. et al Mondragon Goi Eskola Politeknikoa

Dec 20, 2024
5 Resources
0 Stars
Curated

H3 StingRAY Final Design and Technical Report Section 13 Appendices

These documents are referenced in the public version of the H3 StingRAY Final Design and Technical Report (Linked Dataset can be found in Resources section, below), and are submitted separately to allow for public release of head document. The display names have the corresponding ...

Lenee-Bluhm, P. and Prudell, J. Columbia Power Technologies, Inc.

Sep 15, 2023
53 Resources
0 Stars
Awaiting release

M3 Wave DMP/APEX WEC Final Technical Report

This project successfully developed methods for numerical modeling of sediment transport phenomena around rigid objects resting on or near the ocean floor. These techniques were validated with physical testing using actual sediment in a large wave tank. These methods can be applie...

Morrow, M. et al M3 Wave

May 31, 2018
1 Resources
0 Stars
Publicly accessible

Risk Management Plan and Risk Register for Design Low-Power Wave Energy Converter for Non-Grid Applications

Risk Registers for major subsystems completed according to the methodology described in the Risk Management Plan [DE-EE0008627 D1.2 Risk Management Plan PD v1.1 07-19-2019.pdf], also included here.

Amon, E. Columbia Power Technologies, Inc.

Jul 19, 2019
17 Resources
0 Stars
Publicly accessible

BOBr Raw Breaking Wave Data, Agate Beach, OR

Raw data from the BOBr (Buoy to Observe Breaking) wave measurement buoy. Data was recorded off the coast of Newport, OR at Agate Beach, in the surf zone.

C, A. Oregon State University

Oct 31, 2013
12 Resources
0 Stars
Publicly accessible

Triton-C Point Absorber Preliminary System Design Package

Preliminary System Design Package for the Triton-C WEC, including a report and CAD drawings pertaining to the overall preliminary design, system arrangement, surface float hull, and surface float arrangement.

Mundon, T. Oscilla Power, Inc.

Dec 01, 2017
4 Resources
0 Stars
Publicly accessible

TEAMER: Ultra-Low-Cost Torpedo Anchors for Marine Renewable Energy

The submission includes all raw and processed data from Sperra's TEAMER RFTS 9 Drop Testing of Ultra-Low-Cost Torpedo Anchors for Marine Renewable Energy project. This dataset provides comprehensive technical information from the drop test campaign conducted at Sandia National Lab...

Bell, M. et al RCAM Technologies, Inc. DBA Sperra

Sep 20, 2024
8 Resources
1 Stars
Curated

HydroAir Power Take Off Combined Design Report

The submission is the combined design report for the HydroAir Power Take Off (PTO). CAD drawings, circuit diagrams, design report, test plan, technical specifications and data sheets are included for the Main and auxiliary control cabinets and three-phase-synchronous-motor with a ...

Pearson, G. et al Dresser-Rand Company

Jun 26, 2015
15 Resources
0 Stars
Publicly accessible

Design of high-deflection foils MHK applications FEA models Helical turbines

The Ocean Renewable Power Company's (ORPC's) goal is to design, develop, and test hydrofoils with large deflections. The effects of the deflections on cross-flow turbine performance would be evaluated in order to inform design considerations for full-scale water turbines and other...

Barrington, M. and McEntee, J. Ocean Renewable Power Company

Oct 01, 2021
2 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC Numerical Survivability Report Baseline Geometry

Summary of numerical survivability modeling method for the baseline geometry of the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX."

Roberts, J. et al M3 Wave

Aug 16, 2016
2 Resources
0 Stars
Publicly accessible

TEAMER: Additional Degree of Freedom for WEC Model

'Additional Degree of Freedom for WEC' WEC-Sim numerical model from RFTS 1 (request for technical support) TEAMER project. An increase in wave energy converter (WEC) efficiency requires not only consideration of the nonlinear effects in the WEC dynamics and the power take-off (PTO...

McCall, A. et al Dehlsen Associates, LLC

May 26, 2022
2 Resources
0 Stars
Awaiting release

Advanced Control Systems for Wave Energy Converters

This submission contains several papers, a final report, descriptions of a theoretical framework for two types of control systems, and descriptions of eight real-time flap load control policies with the objective of assessing the potential improvement of annual average capture eff...

Scruggs, J. et al Resolute Marine Energy, Inc.

Jan 30, 2017
4 Resources
0 Stars
Publicly accessible

Triton-C WEC Detailed System Design Package

The Detailed System Design Package for the Triton-C WEC, including a report and CAD drawings pertaining to the overall preliminary design, system arrangement, surface float hull, and surface float arrangement. D6 presents an overview of the final detailed design package for the T...

Stinson, K. et al Oscilla Power, Inc.

Nov 02, 2020
5 Resources
0 Stars
Awaiting release

Design of High-Deflection Foils MHK Applications FEA models