Search MHK Data

CalWave WEC Holistic PTO Design

This project aims to advance the Technology Readiness Level (TRL) of CalWave’s commercial scale Power Take-Off (PTO) subsystem through further increasing the level of coupling in physical PTO and concurrent controls design. This is achieved by incorporating a systematic holistic...

Boerner, T. et al CalWave Power Technologies Inc.

Sep 02, 2022
5 Resources
0 Stars
Awaiting release

Triton: Survivability Enhancement of a Multi-Mode Point Absorber

The overall goal of this project was to design and validate a survival mode for the Triton WEC that allows for a reduction in peak loads, while simultaneously allowing for a reduction of capital cost due to the elimination of overdesign to account for uncertainty. In addition, the...

Mundon, T. and Rosenberg, B. Oscilla Power, Inc.

Sep 28, 2018
11 Resources
0 Stars
Publicly accessible

StingRAY Structural Optimization Final Technical Report Appendices

The protected data appendices to the public Final Technical Report. The overall project objective is to materially decrease the leveled cost of energy (LCOE) of the Columbia Power (CPower) StingRAY utility-scale wave energy converter (WEC). This will be achieved by reducing stru...

Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Aug 05, 2020
16 Resources
0 Stars
Awaiting release

HydroAir Power Take Off Combined Design Report

The submission is the combined design report for the HydroAir Power Take Off (PTO). CAD drawings, circuit diagrams, design report, test plan, technical specifications and data sheets are included for the Main and auxiliary control cabinets and three-phase-synchronous-motor with a ...

Pearson, G. et al Dresser-Rand Company

Jun 26, 2015
15 Resources
0 Stars
Publicly accessible

Net Shape Fabricated Low Cost MHK Pass-Through the Hub Turbine Blades with Integrated Health Management Technology

The primary objective of this project is to develop a three-blade MHK rotor with low manufacturing and maintenance costs. The proposed program will design, fabricate and test a novel half-scale low cost, net shape fabricated single piece three-blade MHK rotor with integrated healt...

Wess, D. ARL Penn State

Feb 09, 2016
24 Resources
0 Stars
Publicly accessible

Aquantis 2.5 MW Ocean Current Generation Device Design Details

Items in this submission provide the detailed design of the Aquantis Ocean Current Turbine and accompanying analysis documents, including preliminary designs, verification of design reports, CAD drawings of the hydrostatic drivetrain, a test plan and an operating conditions simula...

Banko, R. et al Dehlsen Associates, LLC

Jun 03, 2015
22 Resources
0 Stars
Publicly accessible

Aquantis 2.5 MW Ocean Current Generation Device MHK Hydrofoils Design, Wind Tunnel Optimization and CFD Analysis Report

Dataset contains MHK Hydrofoils Design and Optimization and CFD Analysis Report for the Aquantis 2.5 MW Ocean Current Generation Device, as well as MHK Hydrofoils Wind Tunnel Test Plan and Checkout Test Report.

Shiu, H. et al Dehlsen Associates, LLC

Jun 03, 2015
16 Resources
0 Stars
Publicly accessible

Wave Tank Testing Report for Controls Validation of a Heaving Point Absorber

The core objectives of this project is to improve the power capture of three different wave energy conversion (WEC) devices by more than 50% using an advanced control system and validate the attained improvements using wave tank and full scale testing. In parallel, we will bring a...

Previsic, M. et al Re Vision Consulting

Aug 26, 2020
3 Resources
0 Stars
Publicly accessible

Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging Software and Data

Software and testing data from the OH Hinsdale Wave lab for DOE-funded project on Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging. This project will perform foundational research and testing to accelerate the sector-wide development a...

Hollinger, G. et al Oregon State University

Oct 26, 2022
11 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC Survival Test Report

This survival test report for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX," summarizes the key tank test data, numerical model results, input test conditions (both numerical and tank testing), and crosses these items with three designs of t...

Morrow, M. and Delos-Reyes, M. M3 Wave

Aug 31, 2017
1 Resources
0 Stars
Publicly accessible

Wave Carpet Controls Design Optimization

To assess CalWave's submerged Wave Carpet Technology for system performance advancement, CalWave seeks to test advanced controls methodologies on a simplified wave carpet model, which potentially can be used in further research to leverage the design to a full wave carpet assessme...

Previsic, M. and Karthikeyan, A. Re Vision Consulting

Aug 26, 2020
1 Resources
0 Stars
Awaiting release

TEAMER: A Tow Body Optical Camera System

Archive consists of design drawings, assembly instructions, and bill of materials (BOM) for a Igiugig Village Council (IVC)/Ocean Renewable Power company (ORPC) tow body camera system for underwater environmental monitoring using optical cameras. This work was conducted by the Uni...

Joslin, J. et al University of Washington

Apr 30, 2021
6 Resources
0 Stars
Curated

MASK4 Test Campaign for Sandia WaveBot Device Dataset

This data and report details the findings from a wave tank test focused on production of useful work of a wave energy converter (WEC) device. The experimental system and test were specifically designed to validate models for power transmission throughout the WEC system. Additional...

Forbush, D. et al Sandia National Laboratories

Dec 25, 2023
5 Resources
0 Stars
Curated

LandRAY PTO Test Plans with NREL NWTC 5 MW Dynamometer

The overarching project objective is to demonstrate the feasibility of using an innovative PowerTake-Off (PTO) Module in Columbia Power's utility-scale wave energy converter (WEC). The PTO Module uniquely combines a large-diameter, direct-drive, rotary permanent magnet generator; ...

Prudell, J. et al Columbia Power Technologies, Inc.

Feb 29, 2016
5 Resources
0 Stars
Publicly accessible

Reference Model 6 Full Scale Geometry (RM6: Oscillating Water Column)

Contains the Reference Model 6 (RM6) full scale geometry files of the Oscillating Water Column, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. This data was g...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
4 Resources
0 Stars
Publicly accessible

CalWave Deep Ocean Basin Test Plan, Ireland

Documentation of CalWave's wave tank test plan (including test setup and overview) at the Deep Ocean Basin at Ringaskiddy, Cork, Ireland. Experimental tank testing of scaled prototype units will be conducted repeatedly throughout the design process to verify device performance for...

Boerner, T. et al CalWave Power Technologies Inc.

Oct 31, 2022
1 Resources
0 Stars
Curated

LandRAY PTO Testing Utilizing the NREL NWTC 5MW Dynamometer

Lenee-Bluhm, P. and Rhinefrank, K. Columbia Power Technologies, Inc.

Jun 13, 2016
3 Resources
0 Stars
Publicly accessible

FOSWEC v2: System identification and control testing at Hinsdale Wave Research Laboratory

This report summarizes the design and execution of a wave tank test of the floating oscillating surge wave energy converter (FOSWEC) in the O.H. Hinsdale Wave Research Laboratory Directional Wave Basin at Oregon State University. This device, which uses two "flaps" that pivot abou...

Coe, R. et al Sandia National Laboratories

Feb 01, 2020
2 Resources
0 Stars
Publicly accessible

Spooling control design for flight optimization of tethered tidal kites

This submission includes three peer-reviewed (under review) papers from the researchers at North Carolina State University presenting different control-based techniques to maximize the efficiency and robustness of a tethered energy-harvesting kite. Below are the abstracts of each ...

Daniels, J. et al North Carolina State University

Sep 16, 2019
3 Resources
0 Stars
Publicly accessible

Specified System Requirements for the HydroAir Power Take Off System

Includes Annual Energy Production of the system, Target Availability of the system, the system's PWR (power to weight ratio), Critical Dimensions and Weights (e.g. center of gravity and center of buoyancy, capture length) of the system, the system's Noise Levels, and All Grid Requ...

Natanzi, S. and Hall, R. Siemens Government Technologies, Inc.

Oct 02, 2020
1 Resources
0 Stars
Awaiting release

TEAMER: Triton Systems Oscillating Water Column Modeling Data and Report

This dataset provides the output of six Wave Energy Converter Simulator (WEC-Sim) simulations and accompanying documentation for the modeling of Triton Systems' oscillating water column (OWC) system at tank scale (validated using available data for tuning the model, Tests 1-2) and...

Forbush, D. et al Sandia National Laboratories

Aug 30, 2024
3 Resources
0 Stars
Curated

2017 Western Passage Tidal Energy Resource Characterization Measurements

These data are from tidal resource characterization measurements collected between April and July 2017 in Western Passage near Eastport, Maine, USA. The dataset contains the following four sub-datasets, each of which is described in more detail in the README.pdf. 1. A bottom-mou...

Kilcher, L. et al National Renewable Energy Laboratory

Jul 31, 2017
33 Resources
0 Stars
Curated

CalWave xWave Device, Non-Commercially Sensitive Project Report

CalWave has developed a submerged pressure differential type Wave Energy Converter (WEC) architecture called xWave. The single body device oscillates submerged, is positively buoyant, and taut moored to the sea floor and integrates novel features such as absorber submergence depth...

Lehmann, M. and Davidson, R. CalWave Power Technologies Inc.

Feb 29, 2024
1 Resources
0 Stars
Publicly accessible

TEAMER: Biofouling Analysis for Wave Energy Piston Design Load Cell Data

Biofouling and corrosion are a major concern for all ocean-deployed components, especially when mechanical motion is involved. Triton has developed the concept of a biofouling mitigation seal as part of the piston sealing assembly for the Triton Wave Energy Converter (TSI-WEC). Th...

Robertson, T. et al Triton Systems, Inc.

Nov 01, 2021
9 Resources
0 Stars
Publicly accessible

Control of an AUV with deployable energy-harvesting kite

This paper examines the control of an autonomous underwater vehicle (AUV) with a deployable energy-harvesting kite for oceanographic observation and surveillance. The proposed design and control strategies specifically address objectives of achieving high-payload, long-endurance A...

Reed, J. et al North Carolina State University

Sep 02, 2019
1 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 Next >>